Slide Out Irregularity or not?

[GCAT9110]

2015 Seneca 37TS. When deploying the driver side slide-out I noticed it comes out slightly cocked. Standing at the cab drivers door and looking down coach, as the slide deploys the entire top of the slide out is ever so slightly cocked outward. As the top of the slide reaches its limits it stops and the bottom catches up thus straitening the slide out. On this model the drive motors/tracks are on the bottom and not the sides. It seems to be deploying and retracting just fine. However, the top portion of the slide wipe seal is out of position, that I have to fix. Is this normal?

[Mnwelsh]

Yes, that’s normal.

[GCAT9110]

Thats a relief! Any idea or what sort of challenge is it going to be to replace the wipe seal for that slide out?