Slide out won't come in

[donellen30]

Originally Posted by Bassdogs

Maybe sounded a little sarcastic, but Hawk's advice was spot on. There should be instructions in your owner material on how to manually retract the slide. There are ways to determine if you are getting power to the motor, but that is over my paygrade. Maybe someone can help with checking that. If no 12V to the slide motor when the switch is pushed, check the switch to see if you're getting power to the switch. If no and no then its most likely a fuse. My first step would be to replace the fuse like another suggested.

Sorry, maybe I wasn't clear. It is not a fuse, it is not a switch, it is the slide out motor. The MH is at the dealer's service department, where it has been for almost two weeks.

My question is, what is a reasonable amount of time it should take for parts to come in (motor for slide and parts for awning that broke back in June)??

[Forelyndogs]

The instructions in the owner's manual are vague at best. Since my owner's manual is specifically Greyhawk, wouldn't it have better to focus exclusively on the Greyhawk models rather than vague and general info about any motor home. My manual is essentially useless though in roughly 150 pages, there might be a rare tidbit of useful info.