I started to winterize my 2017 Redhawk this morning. was unable to add water or compressed air into the motorhome thru the water inlet. I think the water valve control has failed. Whatever setting I tried didn't work. Any thoughts?
I started to winterize my 2017 Redhawk this morning. was unable to add water or compressed air into the motorhome thru the water inlet. I think the water valve control has failed. Whatever setting I tried didn't work. Any thoughts?
You *might* try flipping the inlet screen trick. Tho I would have expected the compressed air to have enough force to push it open.
Here's the winterization doc I put together for my 2016.
Thanks for all the helpful suggestions. Today I checked the mixing valve and that seems to be ok. I removed the water pump and took it apart. Everything was clean and not gummed up. I bench tested it and it ran slower than normal. I put it back in and was able to run antifreeze thru the lines, only slower and less pressure. Over the winter I am going to replace the pump with a new one
.