Quote:
Originally Posted by hoppers4
What Mnxtrik8r said. I had to locate mine when the pump wouldn't draw water from the tank. I found a hose that was too long and was kinked on the corner it made. Shortened it up by a foot and the pump worked much better.
|
Thank you Hoppers. This just saved me from having to take my rig to the dealer and have it fixed. I had the EXACT same problem...pump was running fine...but only a trickle was coming out of the faucets. A kinked hose was the issue.
I started by looking into the hose assembly that runs to the knobs that route the water. I stuck my iPhone in and took a picture...and this is what I found.
So, I had to remove the plywood from the bed, to get behind the hose assembly. Here is a better look behind it. (this is an aerial view down into the hose assembly)
So I cut the hose...removed the kink and tightened it back up and it's running perfect. I had to take about 6-8 inches off the hose.
Hope this helps.