2017 Satellite 18DS Vent wired for 12v?

[kvandivo]

I am wondering if anyone knows if either the 14x14 manual vent or the 14x14 air conditioner vent hole are wired for 12v.

I'm putting in a mini split, which will allow me to get rid of the rooftop AC, but I am wanting to put in a powered vent fan. I don't care if it is in the location of the existing manual vent, or where the AC is currently at.

Thanks!

[RogerR]

My 195rb bath vent had a manual on/off light about 18 inches away. I fished the 12 volt hot wire to the light and spliced onto it.

Installed a Hengs Vortex fan that is a 3 speed and reverse and we love it.

If you have a push button on the light switch and not a wall switch there should be way to get some power from that circuit.

[kvandivo]

So no joy with the vent openings already having wire running to them?

I have one of the round LED lights with the push-button in the center (see attached pic) that is located in the bath that I can go to if the vent holes aren't pre-wired.

How do you actually get into those round LED lights? I haven't pushed on them hard enough to break them or anything but I haven't figured out the trick to getting the shaded front off or rotate it clockwise/counterclockwise, etc.