Looking for a manual for a Reese Revolution 21K pin box. I purchased a 2010 315 FBHS with the Reese installed by Jayco. However I did not receive a manual and can't find one online. I've contacted Reese directly and have not been able to get the right manual.
Our last trip home twisted the wear plate between the upper turret and the revolution arm, and I need to know the proper torque for the bolts when I put the unit back together.
I could use some of the specs from the 16K but I'm afraid they're really different as the Nut that holds the arm in place is 3/4 of an inch smaller on the 16K than the one on my 21K.
Any help would be appreciated if anyone could dig up a manual on their revolution 21K.
Looking for a manual for a Reese Revolution 21K pin box. I purchased a 2010 315 FBHS with the Reese installed by Jayco. However I did not receive a manual and can't find one online. I've contacted Reese directly and have not been able to get the right manual.
Our last trip home twisted the wear plate between the upper turret and the revolution arm, and I need to know the proper torque for the bolts when I put the unit back together.
I could use some of the specs from the 16K but I'm afraid they're really different as the Nut that holds the arm in place is 3/4 of an inch smaller on the 16K than the one on my 21K.
Any help would be appreciated if anyone could dig up a manual on their revolution 21K.
Unfortunately the sidewinder and the revolution are functionally the same however they are built completely different. After removing and inspecting the parts it would appear the wear plate is the only piece needing replacement.
Putting everything back together I used the 16K torque specs as a guideline.
Thanks you to everyone who helped me out, hopefully someone might find the correct spec sheet and post it here.