2014 Eagle Premier 351 RLTS Wet Bay Configuration

[GML]

By any chance does anyone have a operators guide for the different valve positions in the wet bay. See the attached pictures. Some of it is self explanatory but some leaves me a little confused. We just bought this unit and unfortunately I can’t find any info in the manuals I have. Thanks

[RedHorse1]

We have the same config in our older 5th. The valve positions shown are for the two valves below the sticker. The setting I struggled with was “Normal”, turns out that’s for using tank water. We never Boon dock so normal for us is the top setting. So to select “City Fixtures” the top valve points to the right or the “2” position (yes, it’s not marked around the valves) and the lower valve points down. If you have a specific question that would help the folks post an answer.

[norty1]

My 2011 is identical. What's the question? I will dig out my owners manual and try to post a picture tomorrow.

[GML]

I’m just trying to understand what each position is for. I think I understand what city fixtures and city fill is for. Now I understand what normal is for. I’m assuming country fill is for filling the tank when not hooked to city water but I don’t know how that is done. I would like to know how the winterize/sanitize is achieved and tank sanitize. Thanks for everyone’s help.

[RedHorse1]

I believe “Country Fill” will siphon water from a source. Like a pool, ditch or barrel. Notice the valves have the same settings as “Sanitize Tank” which you would want to do if you’d siphoned water from a ditch.

[norty1]

Hope you read these 5 pics from my manual.

They are not very legible. I have downloaded the complete owners manual in the manuals section. It starts on pg. 48. This FP was one of the most popular on the Eagle line for years. They stopped making it after 2014 I think so you got a great one.

[GML]

Thanks for adding the manual to the manuals section. Exactly what I needed. I don’t know why they don’t have this in the 2014 manual. Thanks again.