I have trouble getting my trailer to auto level when in my driveway. If the auto level does not work the middle jacks will not go down. If I can’t get them down I cannot get the midbunk to extend. Is there a way to override this like the older version?
I experienced a similar issue on mine when in front of my house and determined there was extra space on the landing gear brackets. I removed the bolts and lowered each gear about 2". Problem solved!
__________________
Darren, Sandy, 2 kids, & 2 Cavalier King Charles Spaniels
2016 GMC Sierra Denali 3500 HD 4WD Dually 6.6L Diesel
2019 Jayco Pinnacle 37MDQS
You can use the Lipppert One control panel inside to manually extend individual jacks. We had the exact same issue at the last site. We are finding that it is best to add at least a couple of lego blocks under each pad. At our new site the pavement is uneven so I eyeballed and added an extra block on one side. That, and making sure the front gear started with 4” space before auto leveling gave us the range of motion needed for the system to reach where it wanted to without errors.
Linear Mode
