Behind or on other side of water panel where you add water to tanks
Had leak
Removed the crimp clamp and now trying to get white valve out of water line and doesn't seem to water to separate. Don't want to pull to hard either and cause other issues.
Have any of you had to replace or do any of this work and might you share how to get it off.
There should be nothing else holding it. Can you get a pick under the hose and see if you can help the separation a bit? If it turn inside the hose you just need to finesse it out.
__________________
2022 33RBTS
Progressive Industries EMS - Hardwired
Equalizer 4 Point WDH
2021 Ford F350 7.3
Air Lift Rear Bags w/ On Board Compressor (Pending)
2016 28BHBE - (Traded and Missed already)
There should be nothing else holding it. Can you get a pick under the hose and see if you can help the separation a bit? If it turn inside the hose you just need to finesse it out.
Thank you -- Good idea and will try -- it spins easily in hose but was holding what I could and was pulling pretty good and would budge.
ok -- so as a follow-up to my question -- to get the elbow out of the hose - i needed to get a lighter and for just a brief moment to get the hose arm - and poof, if came right out.