|
377rblh water questions
I have a couple drip leaks - all on the vinyl tubing coming into the camper from the water control panel. One is the main water line coming in. The vinyl tube is crimped with the stainless pex type crimpers. My concern is the diameter. Are these crimps the same as the 1/2 inch pex crimps used on normal pex line? Or, are they a different odd size? I have about three with very small drip leaks I need to address. Has anyone used stainless hose clamps to replace the crimps? It is tight in there!
Second question: I have heard the low point drain valves are behind the wall where I have been checking. Exactly where? I don't see them. Probably in plain sight but.....
Thanks for any insight on how you typically repair these leaks in vinyl tubing. I have worked with pex quite a bit but not the vinyl tube under a water pressure situation. By the way, I do have a water regulator and the pressure is not very high.
Mark
|
Linear Mode
