5th wheel levelers

[travis]

I have a 2018 36 Pinnacle and my center stabilizers don’t level but the front and back do fine.

[Grumpy]

Usually means a dislodged or bad sensor. It is normally just behind the rear axle attached to the bottom of the floor on a block of wood.

[shagensicker]

The center stabilizers will only run manually if there is an error on one of the 4 leveling jacks, otherwise, they run down when the auto leveling is completed.

[JohnWedell]

The front and back leveling jacks are the only ones that level the trailer. once the trailer is leveled the Center Jack’s come down and stabilize the center portion of the trailer that’s their only purpose.

[Kahoneys]

My center levelers will lower manually if I hit and hold the right and left leveler button at the same time.

[jasum]

Originally Posted by JohnWedell

The front and back leveling jacks are the only ones that level the trailer. once the trailer is leveled the Center Jack’s come down and stabilize the center portion of the trailer that’s their only purpose.

X2 what he said ^^^^^^^^^^^^^^^^^^^^^^^^^^^^

LCI told me my control box needed replaced when mine kept doing that.

[Tryintoretire]

Has anyone taken the rear leveler apart ? We have a lippert 3.00 and the motor runs ( electric) but the foot doesn't move .I jiggled it and forced it down and the gears seemed to mesh and worked.i wonder if I take apart to tighten that connection between the motor and the foot