|
08-18-2016, 07:56 PM
|
#1
|
Senior Member
Join Date: May 2014
Location: Bonney Lake
Posts: 226
|
5th wheel pin issues.
So the dealer destroyed my plastic disk I use for my 5th wheel pin. Ended up coming home with out one. But the real issue is hook up took 15+ min normally 2 min and the drive home was the worst experience ever. I also noticed the the pin is resting on the jaws and I have light between the plates wtf? No wonder I had issues hooking I needed a good 3/8 to hey the jaws to close. Never have had this sort of issue.
Hitch is a B&W 5th wheel is Mor/ryde RPB Pin Box
Does anyone else experience this?
Sent from my SCH-I545 using Tapatalk
|
|
|
08-18-2016, 07:59 PM
|
#2
|
Senior Member
Join Date: May 2014
Location: Bonney Lake
Posts: 226
|
Quote:
Originally Posted by imjustdave
So the dealer destroyed my plastic disk I use for my 5th wheel pin. Ended up coming home with out one. But the real issue is hook up took 15+ min normally 2 min and the drive home was the worst experience ever. I also noticed the the pin is resting on the jaws and I have light between the plates wtf? No wonder I had issues hooking I needed a good 3/8 to hey the jaws to close. Never have had this sort of issue.
Hitch is a B&W 5th wheel is Mor/ryde RPB Pin Box
Does anyone else experience this? Attachment 26314Attachment 26315Attachment 26316
Sent from my SCH-I545 using Tapatalk
|
Photos
Sent from my SCH-I545 using Tapatalk
|
|
|
08-19-2016, 10:21 PM
|
#3
|
Junior Member
Join Date: May 2015
Location: Eldersburg
Posts: 28
|
I too have the companion Hitch with the MorRyde Pin. you could just raise the fifth wheel a little to make sure the jaws are closing around the skinnier section. Secure it, and then take up the front jacks to put the weight on the hitch.
But more than anything, I'd replace the plastic disk ASAP.
https://www.amazon.com/gp/product/B0...=ATVPDKIKX0DER
This is what I've used all season. Cheap, Quick shipping. Works.
__________________
2016 North Point 377RLBH
06 F350 KR CCLB DRW 4X4 TowBoss - ARPs, BPD EGR, 4" MBRP Exhaust, 4.3 Gears, SCT X4, Edge CTS2,
B&W Companion Hitch
|
|
|
08-20-2016, 05:00 AM
|
#4
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,859
|
I think you can get those disks in several thicknesses. I have one that has been on 3 different fifth wheels and still is in great shape. What did they do? Chop it up with an ax?
Every now an then, I lay mine on concrete and whack it with a hammer to flatten the splines around the hole and that keeps it nice and tight.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
08-20-2016, 10:04 AM
|
#5
|
Senior Member
Join Date: May 2014
Location: Bonney Lake
Posts: 226
|
Well they somehow destroyed the center hole out.
But the thing that didn't seem right is without the disk the weight of the trailer is on the jaws, there is light between the 5th wheel plates. Which to me is wrong.
Sent from my SCH-I545 using Tapatalk
|
|
|
08-20-2016, 10:54 AM
|
#6
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,859
|
Why is the dealer not replacing it? I'll bet he has a display inside full of them.
One should never wear out if treated properly. Most are damaged from hanging down and being crushed during the hook up process.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
08-20-2016, 01:18 PM
|
#7
|
Senior Member
Join Date: May 2014
Location: Bonney Lake
Posts: 226
|
Quote:
Originally Posted by norty1
Why is the dealer not replacing it? I'll bet he has a display inside full of them.
One should never wear out if treated properly. Most are damaged from hanging down and being crushed during the hook up process.
|
They didn't have any, I called, and I didn't know it was missing until I got home. My biggest issue is that by the looks of things I can't haul the trailer without one.
I assume they didn't see it because it's black, and they use a john deer to move trailers.
David
Sent from my SCH-I545 using Tapatalk
|
|
|
08-20-2016, 09:36 PM
|
#8
|
Lost in the Woods
Join Date: Aug 2016
Location: Algonquin
Posts: 99
|
My garage
Have not used bw hitch yet any Suggestions unit has been at factory forever never call back were to send check for tire replacement did not receive used in az one time screws coming thru floor sewer gas list goes on furniture by lippert is garbage lock no work ice maker no water cannot get inside cool 86 outside 85 inside local dealer said only work on our units Mesa az no help at all people in resort could not believe it second bath door glass shattered unit just sitting called factory at least 50 times finally called my dealer in Wisconsin to get thru by calling their rep factory makes about 12 per day then goes home ought to make them look at what they do hope factory does what they say very upset owners
|
|
|
08-20-2016, 11:35 PM
|
#9
|
Senior Member
Join Date: Apr 2016
Location: SW Washington
Posts: 1,024
|
Quote:
Originally Posted by imjustdave
So the dealer destroyed my plastic disk I use for my 5th wheel pin. Ended up coming home with out one. But the real issue is hook up took 15+ min normally 2 min and the drive home was the worst experience ever. I also noticed the the pin is resting on the jaws and I have light between the plates wtf? No wonder I had issues hooking I needed a good 3/8 to hey the jaws to close. Never have had this sort of issue.
Hitch is a B&W 5th wheel is Mor/ryde RPB Pin Box
Does anyone else experience this?
Sent from my SCH-I545 using Tapatalk
|
Something doesn't look right. I have a B&W hitch and did not initially use a disk. I do now, but still have plenty of room without the pin resting on the jaws without one.
__________________
2009 F350 CC LB 4WD
2017 Jayco 355MBQS
|
|
|
08-21-2016, 10:11 PM
|
#10
|
Senior Member
Join Date: Aug 2014
Location: Alberta
Posts: 557
|
Quote:
Originally Posted by My garage
Have not used bw hitch yet any Suggestions unit has been at factory forever never call back were to send check for tire replacement did not receive used in az one time screws coming thru floor sewer gas list goes on furniture by lippert is garbage lock no work ice maker no water cannot get inside cool 86 outside 85 inside local dealer said only work on our units Mesa az no help at all people in resort could not believe it second bath door glass shattered unit just sitting called factory at least 50 times finally called my dealer in Wisconsin to get thru by calling their rep factory makes about 12 per day then goes home ought to make them look at what they do hope factory does what they say very upset owners
|
....breathe....
__________________
|
|
|
08-22-2016, 04:47 AM
|
#11
|
Lost in the Woods
Join Date: Aug 2016
Location: Algonquin
Posts: 99
|
Sorry I was reading your post about hitch learning to use somehow I rattled my flustrations with Jayco nev used this site just learning
|
|
|
08-22-2016, 07:19 AM
|
#12
|
Senior Member
Join Date: May 2014
Location: Bonney Lake
Posts: 226
|
Quote:
Originally Posted by My garage
Sorry I was reading your post about hitch learning to use somehow I rattled my flustrations with Jayco nev used this site just learning
|
No worry. .. sometimes knowing your not the only sole with something wrong makes you feel better, not that we should have issues but they do happen.
Sent from my SCH-I545 using Tapatalk
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|