Eagle HT 30.5 MBOK: The 2nd AC- the one in our bedroom- has thick pieces of insulation in it that seems out of place. When I remove the filters for cleaning, the open space above has these thick piece of insulation jammed in each side, but they arenít pushed against anything. They just runs across the middle of the open space Like a divider.
I canít figure out if they are this way on purpose or if itís sloppy work. I want to make sure they are not blocking the airflow. They are wedged in tight, which implies that itís purposeful, but I donít know why they would be this way. Iíve looked at a bunch of YouTube videos on installing Coleman Mach ACs, but havenít found an answer.
It's the devider between hot air intake and the cold exhaust. Supposed to be there. Most installers use good aluminum tape and tape it in place. It should line up in a groove on the top side of the plastic trim piece. Some folks have found it crooked and their A/C does not cool very well
Livin the dream... Retired!
TV 2016 F250 Crew Sterling Gray SB 6.7 PS airlift ultimate Air bags
2017 Eagle 321RSTS