|
11-29-2019, 07:25 PM
|
#1
|
Senior Member
Join Date: Nov 2016
Location: Grafton
Posts: 317
|
Andersen Hitch help
Hi All. So, I purchased an Andersen ultimate 5th wheel hitch to replace my Curt A16 slider hitch. Reason being is that I cannot get the Curt any lower and my Eagle HT is towing at least 3" nose high. My question is this. I have a MORryde rubber pin box and need to know if the pin box needs to be "pinned" to accommodate the Andersen ball? I know Andersen states that if you use a Rota-Flex pin box you have to buy their plates to "pin" the box to eliminate side to side and front to back movement or you can damage the Andersen Ball Hitch. Any suggestions/Rebuttal theory and or conjecture will be appreciated.
Thanks
Paul
__________________
2017 Jayco 27.5 RLTS
2016 Ford F-350 crew cab Lariat. 6.2 liter
|
|
|
11-29-2019, 07:35 PM
|
#2
|
Member
Join Date: May 2018
Location: Broken Arrow
Posts: 31
|
I have been using the Anderson hitch for about two years with the same pin box you have. No problems and I haven't done anything to the pin box.
__________________
2017 Ford F-250 Powerstroke SRW Lariat
2019 North Point 377RLBH
|
|
|
11-29-2019, 11:11 PM
|
#3
|
Senior Member
Join Date: May 2018
Location: Colorado
Posts: 778
|
I’d shot Andersen a quick email, they’ll know the answer.
__________________
JOHN
People Sleep Peacefully in Their Beds at Night Only Because Rough Men Stand Ready to Do Violence on Their Behalf
|
|
|
11-29-2019, 11:28 PM
|
#4
|
Senior Member
Join Date: Jan 2019
Location: Cincinnati
Posts: 1,186
|
Quote:
Originally Posted by Flyin_low
I have been using the Anderson hitch for about two years with the same pin box you have. No problems and I haven't done anything to the pin box.
|
A 16,000# 5th wheel with a 250? Wow! We have an 11,000# 5th wheel, and feel that it's as heavy as we want to go with our gas 250- with diesel it would be even less. Wow!
__________________
Ford F250 6.2 Gas, 4X4, Short Bed, Companion Hitch
2019 Jayco 28.5 RSTS, MorRyde orbital pinbox.
|
|
|
11-30-2019, 08:11 AM
|
#5
|
Senior Member
Join Date: Jan 2014
Location: Black River Falls, Wi
Posts: 1,154
|
I’d be inclined to follow Anderson’s recommendation given the amount of testing they do in support of a non-traditional hitch design. Is it the hitch that has you nose high or the truck? Would moving the trailer axles be an option to leveling things?
__________________
2019 Pinnacle 36 FBTS
2016 Silverado 3500 CC SRW DuraMax/Allison
1975 Corvette for the sunny days n dry roads
2017 RZR for the rainy days n muddy roads
|
|
|
11-30-2019, 08:34 AM
|
#6
|
Senior Member
Join Date: Dec 2016
Location: Austin, Texas
Posts: 512
|
The Andersen hitch ball is adjustable up and down. Just be careful of your P/U rails.
__________________
2021 Coachmen Freelander 29KB
2019 Jeep Wrangler Sahara
NSA Ready Brute Elite II tow bar
|
|
|
11-30-2019, 10:19 AM
|
#7
|
Senior Member
Join Date: Oct 2019
Location: Phoenix
Posts: 3,907
|
This is a question for Andersen. While you will get answers here, and most are helpful the "experts" need to give you direction and that would the tech at Andersen. I found them to me very knowledgeable and helpful.
There could be a lot riding on bad information.
|
|
|
11-30-2019, 01:19 PM
|
#8
|
Senior Member
Join Date: Jan 2019
Location: Litchfield, CT
Posts: 476
|
I have to ask the obvious question if you are towing with an F-350: how much bed-rail clearance did you have when you were 3" nose-high, and are you going to maintain sufficient clearance if you set the Andersen low enough to ride level?
__________________
2020 Eagle HT 30.5 CKTS Modern Farmhouse (16" wheels, spring shackles set on lower hole of frame, SumoSprings TSS-107-40, standard kingpin, B&W Companion slider, TST-507 TPMS, Progressive Industries hardwired 50A EMS HW-50C)
2019 F250 SRW SuperCab 4X4 SB 6.2 (10,000# GVW) 3.73 Axle 18" wheels
|
|
|
11-30-2019, 02:06 PM
|
#9
|
Senior Member
Join Date: Nov 2016
Location: Grafton
Posts: 317
|
Colorado, Thanks. I did send Andersen an email last week. Still no reply. I don't want to install it and then damage it. I have the original pin box that I may reinstall. I am selling the Curt hitch and may do so with the MORryde pin box. I have all winter to ponder...LOL
__________________
2017 Jayco 27.5 RLTS
2016 Ford F-350 crew cab Lariat. 6.2 liter
|
|
|
11-30-2019, 02:11 PM
|
#10
|
Senior Member
Join Date: Nov 2016
Location: Grafton
Posts: 317
|
Stingray, I am a good 3" nose high now that I upgraded to the F-350 from The F-150. I dropped the 5th wheel shackles in order to raise the ass end up a bit. But still have about 8 3/4" clearance between the truck side rails and 5ver overhang. I still feel comfortable if I drop that down to 5"
__________________
2017 Jayco 27.5 RLTS
2016 Ford F-350 crew cab Lariat. 6.2 liter
|
|
|
11-30-2019, 02:15 PM
|
#11
|
Senior Member
Join Date: Nov 2016
Location: Grafton
Posts: 317
|
Cag, My exact sentiments. While everyone on the "Forum" is very helpful, I think that the Andersen Tech's need to answer this one. I'm surprised that no one else has come across this issue here. Thanks To all.
__________________
2017 Jayco 27.5 RLTS
2016 Ford F-350 crew cab Lariat. 6.2 liter
|
|
|
11-30-2019, 05:04 PM
|
#12
|
Senior Member
Join Date: Jul 2016
Location: Mapleton
Posts: 4,373
|
Call them, they will answer it every time I have called. I have the regular non 5th wheel hitch and called when setting up. Then called about a warranty issue and again to discuss then order the upgrade kit. Every time they were helpful and knowledgeable!
__________________
2017 SLX 195RB
2021 Jeep Grand Cherokee Summit L 5.7L V8
Andersen WDH hitch, Renogy 100 AH Lithium &
200 Watts solar panels from Renogy
Prev. '14 Jeep Grand Cherokee Overland, gas 3.6 V6
|
|
|
12-02-2019, 07:42 PM
|
#13
|
Junior Member
Join Date: Dec 2018
Location: Kathleen
Posts: 28
|
Quote:
Originally Posted by GraftonGuns
Hi All. So, I purchased an Andersen ultimate 5th wheel hitch to replace my Curt A16 slider hitch. Reason being is that I cannot get the Curt any lower and my Eagle HT is towing at least 3" nose high. My question is this. I have a MORryde rubber pin box and need to know if the pin box needs to be "pinned" to accommodate the Andersen ball? I know Andersen states that if you use a Rota-Flex pin box you have to buy their plates to "pin" the box to eliminate side to side and front to back movement or you can damage the Andersen Ball Hitch. Any suggestions/Rebuttal theory and or conjecture will be appreciated.
Thanks
Paul
|
Guns, I had the same problem with my 2016 RAM 3500 and 2018 Jayco 28.5RSTS. I got rid of the Curt sliding hitch and went to the Anderson Ultimate hitch. I love the Anderson, but I had the same problem with the ride height of the 5er. I have the ball in the hitch at the lowest setting. But, to get the 5er to the proper ride height, I removed the bolts on the pin box and raised the pin box arm 2 holes. The 5er now rides correctly. I have not had any problems with clearance because I am careful when turning and backing. You will not have any problems either if you are alert and careful.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|