|
05-21-2019, 07:21 PM
|
#1
|
Senior Member
Join Date: Feb 2019
Location: Schertz
Posts: 1,020
|
Anyone with a generator tray in 5th wheel front storage?
Our last trip, I put our Champion 3100 generator in the front storage area of our fifth wheel. It did fine there as we didn't need it the entire trip. Does anyone have or do they make a tray that the generator can sit on and if you need to use it, can slide it out to run it? Would be much easier to lift off and on if it were on a tray. There's plenty of clearance in all directions for the generator and a tray. And I don't want to have to buy a smaller generator since I already have this one. I have a receiver hitch in the rear rated at 300 lbs but don't really want to put it back there and try to lock it up.
__________________
2018 Ram 3500 CC Longhorn LB SRW w/timbrens
2019 Jayco Eagle 355MBQS
Pullrite 2600 Superlite
|
|
|
05-21-2019, 07:25 PM
|
#2
|
Site Team
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,859
|
My rig has a front area for a generator. I did not get the option. I lift my Honda 2000i into the location and remove it if I use it.
It is pretty light though.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
|
|
|
05-21-2019, 07:31 PM
|
#3
|
Senior Member
Join Date: Feb 2019
Location: Schertz
Posts: 1,020
|
Quote:
Originally Posted by norty1
My rig has a front area for a generator. I did not get the option. I lift my Honda 2000i into the location and remove it if I use it.
It is pretty light though.
|
Yea, ours is about 100 lbs and is sorta bulky. Was easy before my shoulder surgery, lol.
__________________
2018 Ram 3500 CC Longhorn LB SRW w/timbrens
2019 Jayco Eagle 355MBQS
Pullrite 2600 Superlite
|
|
|
05-23-2019, 07:46 PM
|
#4
|
Senior Member
Join Date: Jun 2015
Location: smithville, ont.
Posts: 2,684
|
I made a battery tray that is holding almost 300lbs of batteries.
__________________
2016 North Point 341RLTS
520watts of solar. Morningstar MPPT
4 6volt 235ah Surrette batteries
2017 F-350 Platinum CC SRW
|
|
|
05-23-2019, 07:55 PM
|
#5
|
Senior Member
Join Date: Feb 2019
Location: Schertz
Posts: 1,020
|
Quote:
Originally Posted by klassic
I made a battery tray that is holding almost 300lbs of batteries.
|
That's something like I'm thinking about. It has to be at least 24" wide for the generator to sit on, and I'd have to have the tray mounted high enough to slide out over the lip of the storage area.
__________________
2018 Ram 3500 CC Longhorn LB SRW w/timbrens
2019 Jayco Eagle 355MBQS
Pullrite 2600 Superlite
|
|
|
05-23-2019, 08:52 PM
|
#6
|
Senior Member
Join Date: Jun 2015
Location: smithville, ont.
Posts: 2,684
|
Quote:
Originally Posted by rkymntsno
That's something like I'm thinking about. It has to be at least 24" wide for the generator to sit on, and I'd have to have the tray mounted high enough to slide out over the lip of the storage area.
|
Mine is up 3” to clear the lip.
|
|
|
05-24-2019, 06:11 AM
|
#7
|
Senior Member
Join Date: Feb 2019
Location: Schertz
Posts: 1,020
|
Quote:
Originally Posted by klassic
Mine is up 3” to clear the lip.
|
Nice mod.
__________________
2018 Ram 3500 CC Longhorn LB SRW w/timbrens
2019 Jayco Eagle 355MBQS
Pullrite 2600 Superlite
|
|
|
05-24-2019, 09:19 PM
|
#8
|
Junior Member
Join Date: May 2013
Location: Lake Arrowhead
Posts: 2
|
Gen Tray
MORryde makes a variety of trays. I used a 24 X 24 tray for my generator. It is 2 inches high so the slide out tray clears the lip just fine. I did have to trim the pull out handle as it stuck out just a wee bit too much in order to clear the door. Installation was a breeze as the front baggage area was accessible underneath for the retaining bolts.
|
|
|
05-24-2019, 09:58 PM
|
#9
|
Senior Member
Join Date: Nov 2015
Location: Lakewood, WA.
Posts: 4,541
|
Wow, that look nice and compact.
__________________
2023 Jayco North Point 310RLTS
2022 GMC Denali Ultimate DRW
Retired Army MSG
|
|
|
05-25-2019, 07:14 AM
|
#10
|
Senior Member
Join Date: Feb 2019
Location: Schertz
Posts: 1,020
|
Quote:
Originally Posted by Chevgasman
MORryde makes a variety of trays. I used a 24 X 24 tray for my generator. It is 2 inches high so the slide out tray clears the lip just fine. I did have to trim the pull out handle as it stuck out just a wee bit too much in order to clear the door. Installation was a breeze as the front baggage area was accessible underneath for the retaining bolts. Attachment 50023
Attachment 50024
|
That's awesome!
__________________
2018 Ram 3500 CC Longhorn LB SRW w/timbrens
2019 Jayco Eagle 355MBQS
Pullrite 2600 Superlite
|
|
|
02-08-2020, 01:59 PM
|
#11
|
Member
Join Date: Nov 2017
Location: Pisgah Forest
Posts: 83
|
I love this idea. Most of the generators I have been looking at in the 3000 range and up are all about 20” tall and my opening is a tad less than 20 and maybe right on 20 if I removed the door. The overall height once inside is plenty. I have a Jayco Eagle 321RSTS so curious what you have and your opening height?
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|