Awning Light and Pass Through Door

[Cscott621]

Thought I’d bring my problems at hand to this thread because many of you have great suggestions here.

First issue at hand:

I have two awnings, the main awning light went out on our first trip. I have two separate switches powering the lights on the awnings. Checked for power and have power running to the LCI led strip but upon further inspection, I noticed one of the initial solder joints is burnt so I’m suspecting it has burnt out completely. I noticed it has to fit in the channel along the under side of the awning as well. Any suggestions on a replacement that might be brighter?

Second issue:

The entry side pass through storage door seems to have moisture/water built up somewhere inside of the door. Ran a hose over it/around it and cannot find where it could possibly be leaking into the door. The seal itself looks fine. The styrofoam and particle board is wet though. Any suggestions on where it could be coming in?

Any help/tips would be greatly appreciated!

[mrmom]

Can't help you with the awning lights, but I would check for a leak behind one of your marker lights. Had that problem on mine, although the water came inside the trailer from one of my front marker lights. Water can travel quite a distance before it pools and becomes noticeable.