I removed the awning & attached led light on my 2020 285RSTS. In the panel there is a flip switch for the light & a rocker switch for the awning so to be safe I cut power to the rv before I snipped the awning wire & I disconnected the two prong plug that the light was connected to. After capping the awning wires I turned the power back on.
After that I installed a 12v led light strip onto the sidewall & wired a matching two prong plug onto the end then connected it to the two prong plug that the previous led awning light was connected to. The led light strip immediately lit up….problem is, the awning light switch in the panel is OFF. Now that switch doesn’t control the newly hung led light strip thats connected to the same two prong plug as the old led light.
Anyone have ideas or see this issue before?