|
It should say so in your manual.
If you can't find out anywhere else you can find out by pulling out the center top clearance light. Connected to some of those wires is an 'extra' power lead for the camera. If you don't have the extra lead, then it is not prewired.
If it is not you can still wire it yourself. Just find a 12V feed on the back wall of the trailer. Route it up and out the back with a switch somewhere so you can turn the camera off.
__________________
2017 Eagle HT 29.5BHOK (sold)
2017 Ford Powerstroke 6.7, Crew, 4x4 (sold)
2018 Toyota Highlander
Maggie, Old English Sheepdog
|
Linear Mode
