Connecting HDMI to Insignia TV's
Pinnacle 32RLTS 2021. I found it surprisingly easy to connect the HDMI cables to the Living room Televator and the outside TV. Both are Insignia's. For the TV on the televator, I simply raised the TV 2" and used a mirror and flashlight looking down the left hand side of the TV. You will see the cable connection and two HDMI ports. There is ample room to reach down and connect the HDMI. I used the lower port which is HDMI 3. No sweat. For the outside TV, it is held on with 10 screws and is hard mounted to the wall. Un-screw the top screws, leaving one on each side slightly loose until you remove the lower screws and take all six on the lower plate off. You will find the mounting plate is rather flush to the mounting area top to bottom and you will have to tilt the TV and mount slightly forward for it to come out. Again all connections are on the left side. Plug in your HDMI and mount back with all screws. Again, surprisingly easy. Hope this helps for anyone that may be a bit leery about taking on this task. I will assume that this process would be the same for any TV on the Televator system. Happy Camping. SKIDAWG
__________________
David & Carol Wetuski
CSM, US Army (Retired)
2021 Pinnacle 32RLTS
2022 RAM 3500 6.7L
Ruger, Rhodesian Ridgebacks
ROLL TIDE ROLL !!!
|