Dometic 320 in late model Eagle

Mopar_Earl · 02-02-2018, 07:29 AM

Hello,
Anyone install a dometic 320 toilet in a late model (16/17/18) Eagle, not the HT version? I took measurements and it's difficult for me to tell if the back of the toilet will clear the vent stack bulkhead in the corner. It will be close. I'd hate to order one and have to ship it back cause it didn't fit. Thought maybe someone on here installed one. The 320. Not the 300 or the 310. Those are different.

Thanks,
Earl

WinnieView · 02-03-2018, 08:03 AM

Perhaps sending an email to Dometic and asking for more dimensions/specifications could answer your question.

Mopar_Earl · 02-03-2018, 08:16 AM

I have dometic's specs as well as took measurements on a 320 on display at camping world. That's how I know it will be a very tight fit or a no go with the bulkhead. With the toilet having several different widths as it's shape changes, it's extremely difficult to accurately measure for fit. The rear of the toilet tapers down as it extends. If it wasn't for that, it wouldnt fix at all.

Earl

WinnieView · 02-03-2018, 08:39 AM

We order most things we need using Amazon Prime and they typically offer a no questions asked 30-day return with free return shipping.

nunyadamn · 02-03-2018, 09:29 AM

I can't really help you with your specific trailer, but I put one in my 2014 32BHDS. I just wanted to comment that it took 5 orders to get one from Campers Paradise via Amazon. They were great at sending me them and their customer service was great about the whole thing. I kept getting them broken. Dometic doesn't have a good box for shipping. It may have changed since then. I remember when I was buying it that was the biggest complaint that it took multiple shipments to get one not broken.

If I remember correctly, you can get the spacing from the installation instructions online that will show the spacing from the hole in the floor to the wall. If that measurement is good, it will fit.

Mopar_Earl · 02-04-2018, 06:46 AM

My flange to wall is good, it's the bulkhead panel in the corner that's going on make it iffy.

I emailed dometic to see if they had drawings to send me other than what's on their site.

Earl

nunyadamn · 02-04-2018, 09:07 AM

I am headed to my trailer if you need measurements. Like I said, not the same trailer but maybe you could figure out the difference?

You may also like: