dryer vent

[John1463]

We have a 2020 Pinnacle 32RLTS does anyone know or have the measurements to drill the dryer vent hole. My drill location sticker is not in the closet

[Big1]

Welcome from WA and congrats, is it in the closet? The hole is a 4" but it should be there on the far right hand sides but those who have one will chime in that have the Pinnacle.

[John1463]

Yes. In the closet front right side. We all know the saying never say never. I told wife last summer no washer and dryer. I took the shelves out and installed a closet pole and pulled the vent sticker off. Now we’re installing a washer and dryer

[Big1]

What I did is I was able to get a diagram of my wall from Jayco and I went from there, but my sticker was there so I didn't have to worry too much. Their was still a chance that they had the sticker in the wrong place but it was in the right place.

I do have a bundle of pics on where I install my washer and dryer myself and even drill the big 4" hole and that was nervous racking but I did it. Hopefully those who have your model will chime in and let you know for sure.

The DW and I look at trying to getting a Pinnacle but with our setup we would be upside down.

[JBullet]

Would you still happen to have the pictures or the diagram that Jayco sent you?