Electrical Issue Eagle HT

[sobuck1]

Help Lights are flickering when water pump is on. Feel like I'm in a Disco lol Any Help?? please

[Mustang65]

Check your negative battery cable and make sure that the frame connection is tight. Sounds like a bad ground connection. Also check the battery terminal connections. Is the battery fully charged? Are you on shore power?

Don

[sobuck1]

yes on shore power and thanks for the reply

[tularockstar]

Did you check your battery on/off switch? Your switch has to be On, when you have shore power connected. Otherwise, you're using only your battery, and will be drained if you don't turn on the switch.

Originally Posted by sobuck1

yes on shore power and thanks for the reply

[3'senough]

Are you sure the converter breaker is on as well? Just because your plugged in does not mean the 12V converter is powered up.

[sobuck1]

Thanks Guys I'll check that in a bit. the low water pressure in bathroom was some crap in the faucet from the factory that's clear water pump is real loud have to ck that out also

[namusmc65]

If your water pump sits on the floor like mine does, it can make a vibration all through the unit. What I did was place some foam padding underneath the water pump and it took almost all of the noise and vibration out.