fifth wheel side and floor separation

[Randyman69357]

It is where the side wall meets the deck. That is the part that is over the bed of your truck. It is the part below the awning arm and towards the nose in this picture. There is a molding that covers where the two panels meet and that is where it was sagging.

[Edutron]

Ah yes, OK. The only issue I've had in that area is the molding due to the truck exhaust pipe blowing hot exhaust on the right lower side molding causing to be deformed and coming apart (deformed out of the channel). I cured that problem with a Flo~Pro Vented Turn Out Tip exhaust (angle pipe) and MBRP tailpipe on my GMC 3500 duramax exhaust. The molding was inexpensive, but the PIA of reinstalling the molding was time consuming. I did see the smaller attaching screws. Thanks for the heads up. (2020 Pinnacle 32RLTS)