Floor damage

[Cruze108]

Just noticed something gouged the floor in the kitchen which caused a piece of floor about the size of a quarter to peel up. What can I use to glue this back down and seal around the edges so it will not tear up completely?

[TCNashville]

I'd probably use some caulking adhesive that dries clear but first I'd try and figure out what caused the gouge.

[DMRGMC]

There is a specific glue for vynil type flooring made by Armstrong. It is a low gloss kit # S 564 with seam cleaner, seam coating, coating de glosser and a spify applicator bottle. It says for all residential low gloss sheet flooring. I guess there’s one for gloss flooring as well. Big box store should sell it. I had the occasion to have to repair a slit in the vynil from a screw that extruded from the bottom of the slide. I used that adhesive to glue it down at the rip site and then fill the accompanying gouge with more than one application. Then I covered it with a strip of clear packing tape to protect it with intentions to remove the tape. I forgot to remove the tape and forgot about it until the day we traded it 3 years later. I can’t remember what I payed for it.