Quote:
Originally Posted by RickAE
We had a problem like that Turned out to be the propane bottles. We weren't getting any heat (but we also had no burners on the stove working) The heater would try to start but it would just cycle. Both bottles were full. It seems we had to turn the bottles off loosen the connections at the bottles to let it bleed off pressure re-tighten them and turn the bottles on very slowly ( I was told by the propane dealer if you open the valves quickly it would trip a shut off as if there was a surge.)It worked after we did this. I hope this helps
|
Yes, I had this happen. The surge shutoff was located inside the fitting that connects to the regulator. I poked it with a wire and that seemed to fix it. Looking back, what probably fixed it was disconnecting and reconnecting it
You can tell if this is the problem by trying to light your stove. If it doesn't work properly the problem is with propane delivery, not your furnace.