|
|
02-04-2022, 11:35 AM
|
#1
|
Junior Member
Join Date: Jan 2021
Location: Deposit
Posts: 16
|
Furnace not heating
We have a 2019 Jayco Northpoint. Our furnace was working, this morning it was putting out cool air, not hot. Any thoughts?
|
|
|
02-04-2022, 11:38 AM
|
#2
|
Senior Member
Join Date: Mar 2015
Location: Atlanta
Posts: 770
|
out of propane
__________________
2018 Jayco Greyhawk 31FS
2023 Wrangler 392
|
|
|
02-04-2022, 01:08 PM
|
#3
|
Senior Member
Join Date: Aug 2018
Location: ridgecrest
Posts: 1,196
|
Quote:
Originally Posted by mini4mw
out of propane
|
happens fast when you run the darn thing a lot..
|
|
|
02-04-2022, 03:11 PM
|
#4
|
Junior Member
Join Date: Jan 2021
Location: Deposit
Posts: 16
|
First thing we checked, both tanks full. Thanks.
|
|
|
02-04-2022, 03:21 PM
|
#5
|
Senior Member
Join Date: Aug 2018
Location: ridgecrest
Posts: 1,196
|
could be a number of things. simplest to check is gas, which you did. one step further would be to shut both ac/dc breakers off/on, sometimes this resets a glitch in the operating board. If that does not work then check the furnace vent to make sure it is not obstructed, make sure stove and oven ignite. Sometimes running the stove for a few minutes helps purge the gas lines from trapped air bubbles.. If those checks do not come up with good results then you should have a RV HVAC person look at it. Sometimes the igniter control board goes bad, sometime the thermostat goes out. What year model is your RV?
|
|
|
02-04-2022, 04:56 PM
|
#6
|
Senior Member
Join Date: Jun 2021
Location: Morehead City
Posts: 735
|
Quote:
Originally Posted by Patti
We have a 2019 Jayco Northpoint. Our furnace was working, this morning it was putting out cool air, not hot. Any thoughts?
|
Had a lot of rain lately?
__________________
2016 Jayco Precept 31 UL
|
|
|
02-04-2022, 07:41 PM
|
#7
|
Senior Member
Join Date: Jul 2016
Location: Winnipeg
Posts: 314
|
Did you happen to open the propane valves to quickly activating the safety feature detecting an open line?
Happened to me a few times.
__________________
2018 Jayco Eagle HT 265HBS
2015 F250 CC 6.2 4x4
PullRite 16K SuperGlide w/SuperRail
Reese 5th Airborne (bagged) Pin Box
RoadMaster Shock Kit
X-Factor Cross Bracing
|
|
|
02-04-2022, 07:42 PM
|
#8
|
Junior Member
Join Date: Jan 2021
Location: Deposit
Posts: 16
|
No, we haven’t. Thanks
|
|
|
02-04-2022, 07:47 PM
|
#9
|
Senior Member
Join Date: Sep 2015
Location: New York & Florida
Posts: 1,037
|
Was the air coming out of the floor vents or the ceiling vents that would make a big difference whether you’re using the furnace or the heat pump
__________________
2022 RAM 3500 DRW, 4X4, 4.10, 6.4 Hemi, 50 Gal Gas, Curt A20 hitch, Tire Minder
Traded: 2018 RAM 3500 DRW, 4X4, 4.10, 6.4 Hemi, Curt A20 hitch, Tire Minder
2018 North Point 315rlts with most of the options.
|
|
|
02-04-2022, 08:06 PM
|
#10
|
Junior Member
Join Date: Jan 2021
Location: Deposit
Posts: 16
|
Cool air was coming out of the floor vents.
|
|
|
02-04-2022, 08:52 PM
|
#11
|
Junior Member
Join Date: Feb 2022
Location: San Tan Valley
Posts: 5
|
What is the battery voltage? When we had our Cherokee Grey Wolf 23mk the furnace was blowing cold air because the voltage was to low and not allowing the igniter to light the propane.
|
|
|
02-05-2022, 12:06 AM
|
#12
|
Senior Member
Join Date: Jun 2016
Location: Denver
Posts: 4,248
|
Quote:
Originally Posted by Patti
We have a 2019 Jayco Northpoint. Our furnace was working, this morning it was putting out cool air, not hot. Any thoughts?
|
Fire up the propane stove - let it run for a bit. Sometimes that purges air in the line.
Head outside when it tries to start and see if you feel hot air coming out of the exhaust.
Mine will attempt to light three or four times, but you can feel the hot air from the exhaust.
If you do - then your furnace is trying to start but is sensing a reason to not. Check vents for obstructions. You may need a new Sail Switch (I did).
If the exhaust is not hot at all, then something might be wrong with the control board. Many boards have red LEDs that will blink a trouble code and help you debug.
__________________
2016 Greyhawk 31FK
|
|
|
02-05-2022, 10:49 AM
|
#13
|
Senior Member
Join Date: Aug 2018
Location: ridgecrest
Posts: 1,196
|
Quote:
Originally Posted by Patti
Cool air was coming out of the floor vents.
|
Make sure to enlighten us what you found the problem to be,. Curious minds need to know.. Whatever it is or was, i hope it was something simple and minor.. Best wishes.
|
|
|
02-09-2022, 08:07 AM
|
#14
|
Junior Member
Join Date: Jan 2021
Location: Deposit
Posts: 16
|
Will let you know after the rv repairman comes next week. It’s a two week wait for the repairman to come .
|
|
|
02-09-2022, 08:22 AM
|
#15
|
Senior Member
Join Date: Mar 2017
Location: Kingman, AZ
Posts: 1,985
|
There is a reset switch on the top cover. Sometimes hard to see without a flashlight.
__________________
Lee & Kathy, and our alarm clock Jake!
2017 Starcraft Autumn Ridge 266RKS 50 amp.
2017 Toyota Tundra Crewmax 4x4, 10-1-2021
|
|
|
02-09-2022, 09:59 AM
|
#16
|
Senior Member
Join Date: Jan 2018
Location: Clanton AL
Posts: 111
|
Could also be the pressure regulator. Jayco has a recall going on one of the ones they installed. Mine went bad and the same thing happened to me. Changed out the regulator and haven't had anymore problems.
__________________
George & Tracey
2018 Eagle 321 RSTS
2014 Chevy 2500hd 6.6
|
|
|
02-09-2022, 10:03 AM
|
#17
|
Senior Member
Join Date: Mar 2015
Location: Atlanta
Posts: 770
|
When the regulator went bad, did the range or water heater work?
__________________
2018 Jayco Greyhawk 31FS
2023 Wrangler 392
|
|
|
02-09-2022, 10:23 AM
|
#18
|
Senior Member
Join Date: Jan 2018
Location: Clanton AL
Posts: 111
|
Range did but had a tankless water heater and it didn't.
__________________
George & Tracey
2018 Eagle 321 RSTS
2014 Chevy 2500hd 6.6
|
|
|
02-09-2022, 10:44 AM
|
#19
|
Senior Member
Join Date: Jun 2021
Location: Morehead City
Posts: 735
|
Here is a great video for trouble shooting
If yours has an outside access panel, it’s much easier.
__________________
2016 Jayco Precept 31 UL
|
|
|
02-12-2022, 01:15 PM
|
#20
|
Junior Member
Join Date: Jan 2020
Location: Saint Louis
Posts: 25
|
I just had my trailer in for the same thing. It was the Sail switch on the motor. The switch was ok but the part that the switch mounts to is stopping the blade from fully engaging the switch The part has been redesigned because of this problem. Getting the replacement part is very difficult right now. The plastic right under the blade can be removed with a Dremel tool. This gives it enough room to fully press the switch. If you can’t get a switch this will get you back up and running until they are available.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|