Hello

[jetlag]

Originally Posted by F350guy

I've seen comments about folks using them from all over. They must have a network of installers. I'm not sure why they list Norman as their headquarters as the owner's are full time rv'ers. I think they were in Indiana when I was dealing with them. The guy that did ours did live in the Oklahoma City area.

I just sent them an email and will probably call them Monday as well. We will be pulling with a Ram 3500 srw and will feel a lot better with them. Thanks again, will keep you updated on the project.

[pc35]

welcome the pinnacle look very nice and spacious . enjoy

[jetlag]

Originally Posted by pc35

welcome the pinnacle look very nice and spacious . enjoy

Thank You, we are looking forward to it.

[jetlag]

Originally Posted by F350guy

I've seen comments about folks using them from all over. They must have a network of installers. I'm not sure why they list Norman as their headquarters as the owner's are full time rv'ers. I think they were in Indiana when I was dealing with them. The guy that did ours did live in the Oklahoma City area.

So far so good, they responded to my email this morning and would like a picture of the "axle tag" on the trailer to obtain all the information they require to quote a price. Forwarded to the dealer requesting they take a photo and forward to me.

[jetlag]

Originally Posted by F350guy

We used Performance Trailer Braking to do our conversion. They come to your house to do the work. The guy who did ours had obviously done it many times before. A very neat and clean installation. Ours was around $3500, which included a little over 9% state and local tax for the parts. Absolutely a night and day difference. I no longer go into panic mode if I have to make a quick stop.

Dealer took picture and sent to us. Forwarded to them and i have a quote!! $2625 for the kit, $1000 for the installer They recommend upgrading to the 8K kit that has 9/16" studs. They call it peace of mind for an additional $64. All this is above my pay grade, but sign me up! Thank you so much for guiding us to these folks. Their installer will be in our area in October which is just fine.

[F350guy]

Originally Posted by jetlag

Dealer took picture and sent to us. Forwarded to them and i have a quote!! $2625 for the kit, $1000 for the installer They recommend upgrading to the 8K kit that has 9/16" studs. They call it peace of mind for an additional $64. All this is above my pay grade, but sign me up! Thank you so much for guiding us to these folks. Their installer will be in our area in October which is just fine.

Glad I was able to help. Let us know how it goes when the time gets here.

[jetlag]

We certainly will

[mkrenn]

We love ours! See signature.....

[jetlag]

Originally Posted by mkrenn

We love ours! See signature.....

Thank you, we are looking forward to it

[jetlag]

Originally Posted by F350guy

Glad I was able to help. Let us know how it goes when the time gets here.

Here is the quote. We had looked at additional items, but the money kept piling up and we don't have the trailer yet, lol. I told them we may do it later. It would have been another $1800 for 8K axles, springs, ubolts and tie plates. That includes labor

908-2 Tandem Brake Kit w/lug nuts
Tandem 7k/8k Disc Brake Kit with Install Kit w/9/16 inch lug
nuts
1 2,689.00 2,689.00
13" 7k/8k Premier Disc Brake End Kit 8-6.5" BC, 9/16"
Stud
K71-908-00 - 13" 7k/8k Premier Disc Brake End Kit 8-
6.5" BC, 9/16" Stud
4 398.00
Brakerite by Dexter EHB 1500 psi
K68-001-00 - Brakerite by Dexter EHB 1500 psi
1 775.00
Chestnut Forge Brakerite Mounting Bracket
068-344-01 - Chestnut Forge Brakerite Mounting
Bracket
1 38.00
Brake Line Kit Tandem Axle
K71-B19-00 - Brake Line Kit Tandem Axle
1 220.00
9/16-18 Closed End XL Bulge Acorn Lug Nuts - Cone
Seat - 3/4" Hex
LN916-1834 -9/16-18 Closed End XL Bulge Acorn Lug
Nuts - Cone Seat - 3/4" Hex
32 2.00
2021 Jayco Pinnacle 36FBTS - Dexter, Tandem, 7k, 8 Lug,
1/2 Inch
2021 Ram 3500 INT