Quote:
Originally Posted by Smokey1979
I have a Jayco Pinnacle 2021 with a Fogatti instant water heater. I have it set to hot water with electricity on my command panel inside the camper It will attempt to start when I turn on the hot water but after a couple of tries it shows an error code of E1. When I change it to hot water with propane it functions properly. There is obviously some kind of electrical issue but I can’t figure it out. Has anyone experienced this? I hope to repair it myself as opposed to taking in for a service call and not being able to use it or several months due to service backlog.
|
We have the same heater and a '21 Pinnacle. I do not believe the heater works of electricity but gas only. The E1 code says "ignition Failure, no ignition. Please check whether the gas is supplied normally and check it before use". The manual tells you it is an RV instantaneous gas water heater. I believe the controls within JayCommand you refer to are generic to the panel, we have it as well, and may or may not be applicable depending on equipment installed. My wife seems to remember this point from the PDI this past August.