How to change out the dinette light ??

[Dannie0429]

We found our replacement sconces at Home Depot and Lowes. Suggest you take 1 with you to make sure the hole is the same. The ones we got had a slightly larger hole so I ordered some rubber washers that worked .

[Marjorie19]

OH MY!!! I have a 2021 Fifth Wheel we just bought and our light over the island broke. We are waiting on what they are going to do for replacing it right now. Totally under warranty. The light broke at the base and now I am worried the second one will also. they dont seem very strong the stem that is. Hmmmmm PIctures are sideways. Not sure how to turn them around.

[16WhiteColly]

I replaced mine with these. One over the sink, one over the dinette. Left all others as is.

https://www.amazon.com/Leisure-LED-I...%2C469&sr=8-15

[Jcleary0919]

Originally Posted by krbrat

I replaced all of my 12 volt pendant lights over my sink. You have to take the base off the ceiling, disconnect the wires and then unscrew the whole assembly. I put a new light holders in the fixture for 12 volt replaceable bulbs. Which you can get on Amazon. Now all I have to do is change the bulbs. You can always change the globe too. Good luck

krbrat, do you have pics of your finished setup or links to your replacements parts? Our pendants have broken in transit and I know I don't want to go back.

[Nature Ist]

I went through 3 of the short stem pendants on our HT 30.5 CKTS, all replaced under warranty. As noted already: there is no disassembly or replaceable part other than the glass globe. In every case the break occurred where the stem met the bell base housing. I found mine hanging by the wires once!
When I received the 2nd and 3rd from Jayco, I filled the bell where the stem joins with a large amount of hotmelt glue. That reinforced the whole mount and they show no sign of stress after a year and 7,000 miles.

[AKRUEBBE]

Originally Posted by Marjorie19

OH MY!!! I have a 2021 Fifth Wheel we just bought and our light over the island broke. We are waiting on what they are going to do for replacing it right now. Totally under warranty. The light broke at the base and now I am worried the second one will also. they dont seem very strong the stem that is. Hmmmmm PIctures are sideways. Not sure how to turn them around.

I had the same thing happen to one of our island lights also. I thought it was a lost cause but took it down and discovered that the shaft it threaded on both ends. I tightened the nuts up snugging the shaft up against the base and it's been fine for over 10 months. I would try that first. It saved me a lot of money.