How well do your decals line up

[Northern Wis.]

I'm wondering if its normal for the decals on the slide not to line up with the decals on the trailer body when the slide is retracted? I know that the decals are applied around the edge of the slide but when standing back a few feet looking at the side of the trailer the misalignment must be close to 3/4 of and inch. It really looks odd.
The dealer is installing a new living room slide ram next week to hopefully get the living room slide to finally work properly, and I'm wondering if I should bring up the decal issue while I'm there.
Thanks
Bill

[krackeer]

Maybe after they do their work on the slide it will line up?

[troutslayer]

I really never noticed ours so I'm guessing they align pretty well. I think I would have noticed 3/4" difference.

[stjohneyre]

A couple of months back we were looking a White Hawk on a dealer lot. These TT's have a color molded base trim and some of the decals extend off of them. The one we were looking at did not line-up correctly in one spot and was off by an inch. It was a worker not doubt rushing through the placement and being paid on a piece work basis. I'm picking mine up on Monday from the dealer and this is one of these things I'll be looking closely at.

[Northern Wis.]

I'm hoping that they will line up after the slide is working properly! There has been far to many quality control misses on this 5th wheel on the part of Jayco already.

[troutslayer]

Originally Posted by Northern Wis.

I'm hoping that they will line up after the slide is working properly! There has been far to many quality control misses on this 5th wheel on the part of Jayco already.

I hope things get better for you! RVs are supposed to be made in order to give us pleasure, not grief. We have only had a couple very small issues. Our dealer was excellent and probably fixed anything that didn't look right before we made the purchase (just my guess).