2019 Jayco North Point. Large kitchen slide stuck with rear corner extended 12", front corner fully retracted. Owner's manual does not cover this type of slide. Anyone know how to manually retract the extended end?
My bedroom slide did the same thing...called Lippert and they talked me thru a bypass procedure to get it totally out and in....got to find the motor controller for the slide motors...my wife and I also searched and found a wire connection unplugged...replugged and has worked fine since then....you can down load a trouble shooter manual for the slide outs from Lippert....which had the info in it that the Lippert man walked me thru...easy to do....
The bedroom slide controller is in the basement on the ceiling near the propane compartment....there is another controller near the water command center on our Pinnacle that I assume might be for the kitchen slide....
__________________
Stan & Sandra
Shipman, VA. & Jacksonville FL.
2015 F350 Lariet CC Dually
2018 Pinnacle 36KPTS
Thanks, Grumpy. After trying everything I could think of - unplugging, plugging, pushing, pulling, etc. - the extended end of the slide was finally brought in using the "retract" button. Slide operated normally at next campground. I may still need to synchronize the motors per the video.
Thanks, Sola123. Yep, know about the controller; even had a new controller put in which didn't help. None of the help files covered my slide design, however. Was finally able to get slide to respond and now seems to be working normally.
Location: Natalbany Creek Campground, Amite City, LA
Posts: 3,244
If it's the slim rack type of slide, which I'm sure it is, there is no way to syncronize the motors. They are not like the schwintek slide.
__________________
AL & JANET KRUEBBE
2019 PINNACLE 37RLWS
2018 NORTH POINT 315RLTS (TRADED)
2017 RAM 3500 DRW DIESEL/AISIN 4.10 AIR BAGS
B&W COMPANION TURN OVER BALL HITCH
Formerly from Sequim, WA
DISNEY LOVERS
Linear Mode
