|
|
11-02-2017, 05:59 PM
|
#21
|
Senior Member
Join Date: May 2017
Location: Valparaiso
Posts: 420
|
Good tip Doubleheader.
__________________
2017 Eagle HT 27.5RKDS (Traded)
2020 Montana High Country 295RL
10th Anniversary Edition
2019 Silverado 3500HD - Duramax - SRW - 4WD - CC - LTZ - 8' Bed
Reese M5 20K
|
|
|
11-03-2017, 12:58 PM
|
#22
|
Senior Member
Join Date: Feb 2017
Location: Warren
Posts: 244
|
Ok took some pics. The 1st one is the bedroom slide, hope you can see how the topper bracket is mounted on the lower portion of the flange trim. The 2nd pic shows the mounting bracket on the large slide, mounted just below the flange.
Sent from my iPhone using Tapatalk
__________________
2014 Ram 2500 Cummins
2018 Eagle 293RKDS
|
|
|
11-03-2017, 01:00 PM
|
#23
|
Senior Member
Join Date: Feb 2017
Location: Warren
Posts: 244
|
Sorry, looks like I mixed up the order. The 2nd pic is the bedroom slide.
Sent from my iPhone using Tapatalk
__________________
2014 Ram 2500 Cummins
2018 Eagle 293RKDS
|
|
|
11-03-2017, 01:03 PM
|
#24
|
Senior Member
Join Date: Feb 2017
Location: Warren
Posts: 244
|
Another tip. One of the last installation actions is to pull the factory installed cotter pins out of each end of the topper. It’s much easier to do if you straighten the cotter pins at ground level before installing the topper.
Sent from my iPhone using Tapatalk
__________________
2014 Ram 2500 Cummins
2018 Eagle 293RKDS
|
|
|
11-03-2017, 02:46 PM
|
#25
|
Senior Member
Join Date: May 2017
Location: Valparaiso
Posts: 420
|
Installed the hex brackets and material brackets on both slides today. Waiting on a friend to help me install the topper:
__________________
2017 Eagle HT 27.5RKDS (Traded)
2020 Montana High Country 295RL
10th Anniversary Edition
2019 Silverado 3500HD - Duramax - SRW - 4WD - CC - LTZ - 8' Bed
Reese M5 20K
|
|
|
11-03-2017, 02:48 PM
|
#26
|
Senior Member
Join Date: May 2017
Location: Valparaiso
Posts: 420
|
Picture of modified hex bracket for 6" flange on wardrobe slide:
Picture of "normal" hex bracket:
__________________
2017 Eagle HT 27.5RKDS (Traded)
2020 Montana High Country 295RL
10th Anniversary Edition
2019 Silverado 3500HD - Duramax - SRW - 4WD - CC - LTZ - 8' Bed
Reese M5 20K
|
|
|
11-03-2017, 03:33 PM
|
#27
|
Senior Member
Join Date: Feb 2017
Location: Warren
Posts: 244
|
Your bracket looks excellent. If i were you I’d take the rain gutter off and then re-mount after your install above your topper. You have it on the run now. Great job.
Sent from my iPhone using Tapatalk
__________________
2014 Ram 2500 Cummins
2018 Eagle 293RKDS
|
|
|
11-03-2017, 03:48 PM
|
#28
|
Senior Member
Join Date: Apr 2017
Location: New Hampshire
Posts: 249
|
I have a 2018 27.5RKDS that I had Jayco install the slide toppers on. If you can wait until tomorrow, I will be happy to take pictures for you..
__________________
2018 Chevy Silverado 2500HD High Country 4X4, towing pkg, Vortec 6.0 ltr, 4.10 gears,6.6' bed,Reese Titan 16K hitch.
2018 Eagle HT 27.5 RKDS
|
|
|
11-03-2017, 03:50 PM
|
#29
|
Senior Member
Join Date: May 2017
Location: Valparaiso
Posts: 420
|
Quote:
Originally Posted by Doubleheader
Your bracket looks excellent. If i were you I’d take the rain gutter off and then re-mount after your install above your topper. You have it on the run now. Great job.
Sent from my iPhone using Tapatalk
|
Thanks for the compliment on the bracket Doubleheader. I may remove the rain gutter or I might just leave it where it is.
__________________
2017 Eagle HT 27.5RKDS (Traded)
2020 Montana High Country 295RL
10th Anniversary Edition
2019 Silverado 3500HD - Duramax - SRW - 4WD - CC - LTZ - 8' Bed
Reese M5 20K
|
|
|
11-03-2017, 06:24 PM
|
#30
|
Senior Member
Join Date: May 2017
Location: Valparaiso
Posts: 420
|
Quote:
Originally Posted by Ruth
I have a 2018 27.5RKDS that I had Jayco install the slide toppers on. If you can wait until tomorrow, I will be happy to take pictures for you..
|
Ruth, I am well on my way to almost completing the install but pictures would be great as a comparison.
__________________
2017 Eagle HT 27.5RKDS (Traded)
2020 Montana High Country 295RL
10th Anniversary Edition
2019 Silverado 3500HD - Duramax - SRW - 4WD - CC - LTZ - 8' Bed
Reese M5 20K
|
|
|
11-05-2017, 11:23 AM
|
#31
|
Senior Member
Join Date: Apr 2017
Location: New Hampshire
Posts: 249
|
__________________
2018 Chevy Silverado 2500HD High Country 4X4, towing pkg, Vortec 6.0 ltr, 4.10 gears,6.6' bed,Reese Titan 16K hitch.
2018 Eagle HT 27.5 RKDS
|
|
|
11-05-2017, 04:47 PM
|
#32
|
Senior Member
Join Date: May 2017
Location: Valparaiso
Posts: 420
|
Thanks Ruth for the "factory" install topper pictures. They attached the bracket to the flange rather than below the flange against the slide body. That was going to be my option #2 if I were not able to modify the brackets.
__________________
2017 Eagle HT 27.5RKDS (Traded)
2020 Montana High Country 295RL
10th Anniversary Edition
2019 Silverado 3500HD - Duramax - SRW - 4WD - CC - LTZ - 8' Bed
Reese M5 20K
|
|
|
11-05-2017, 11:50 PM
|
#33
|
Moderator Emeritus
Join Date: Apr 2011
Location: Michigan
Posts: 9,424
|
Quote:
Originally Posted by triplebvalp
snip..... They attached the bracket to the flange rather than below the flange against the slide body.....snip
|
May have be due to the window location with the OEM bracket (?).
Bob
__________________
2016 GM 2500HD 6.0L/4.10
2018 Jay Flight 24RBS
2002 GM 2500HD 6.0L/4:10 (retired)
2005 Jayco Eagle 278FBS (retired)
1999 Jayco Eagle 246FB (retired)
Reese HP Dual Cam (Strait-Line)
|
|
|
11-06-2017, 05:27 PM
|
#34
|
Senior Member
Join Date: May 2017
Location: Valparaiso
Posts: 420
|
Quote:
Originally Posted by Rustic Eagle
May have be due to the window location with the OEM bracket (?).
Bob
|
No Rustic Eagle ... it's because the wardrobe slide flange is 6" tall. The brackets are made for a flange that is 4-1/2" tall.
__________________
2017 Eagle HT 27.5RKDS (Traded)
2020 Montana High Country 295RL
10th Anniversary Edition
2019 Silverado 3500HD - Duramax - SRW - 4WD - CC - LTZ - 8' Bed
Reese M5 20K
|
|
|
11-10-2017, 01:41 PM
|
#35
|
Senior Member
Join Date: May 2017
Location: Valparaiso
Posts: 420
|
Finally got a friend to help me install the toppers:
__________________
2017 Eagle HT 27.5RKDS (Traded)
2020 Montana High Country 295RL
10th Anniversary Edition
2019 Silverado 3500HD - Duramax - SRW - 4WD - CC - LTZ - 8' Bed
Reese M5 20K
|
|
|
11-15-2017, 06:38 AM
|
#36
|
Senior Member
Join Date: Jun 2012
Location: West Chicago
Posts: 550
|
Appreciate the tips here, on my list once Santa brings me one.
__________________
2019 F250, gas, 4.30
2017 29RKS
|
|
|
08-26-2020, 02:12 PM
|
#37
|
Member
Join Date: Jul 2019
Location: WEEKI WACHEE
Posts: 32
|
Ruth, which brand awning did the factory install? I am wanting to put an awning on my wardrobe slide on a 2018 28.5 RSTS that also has the window. I have awnings on my other 2 slides.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|