Installing W/D Combo NEED HELP!

[JohnWedell]

In the process of installing a washer dryer combo in my 2018 315rlts need someone that has done it already. do you need to remove the panel on the front wall in the washer dryer closet

[2naEagle]

Originally Posted by JohnWedell

In the process of installing a washer dryer combo in my 2018 315rlts need someone that has done it already. do you need to remove the panel on the front wall in the washer dryer closet

I have stackable set.
I did not install the washer dryer, had it done at the dealer before pick up.

I went out and looked at it (very heard to see).
looks as if they only removed a piece big enough to put the vent in.
[IMG][/IMG]

If you can, put something under the washer to help with vibration.
Something like this
https://www.lowes.com/pd/Kellett-4-P...n-Pads/1078011

I put them under the washer in the house and they work very well.
I was unable to get them under the washer in the trailer without removing them and I was not going to do that. Maybe you can before putting them in.

Maybe use a higher quality dryer vent hose than I got.

[JohnWedell]

I have the combo installed but the vent hose prevents me from pushing it back any farther and the closet door will not close. Have no idea how a stackable unit will fit without altering the side and back walls. I don’t want to start cutting without knowing what to do.

[2naEagle]

Yes I think I can see what you're talking about. Looks like they took the back out in the area of the vent so it would go all the way back. Vent is cut out in the front cap.
[IMG][/IMG]
[IMG][/IMG]

[JohnWedell]

Thanks 2naEagle that helps out a lot.