|
Jayco 24RE Fifth Wheel Furnace Issues
When we picked up our fifth wheel from the dealership last August, the furnace worked just fine. We didn't need the furnace since.
I removed the bulkhead in the basement to clean the pump filter and found a bare ended Blue/White wire from the furnace just hanging there (see photos). All of the Wago connectors within foot or so of this wire were all full.
According to the Suburban install manual, the Blue/White wire is supposed to connect to the thermostat.
The thermostat is all part of the BMPro JaycoCommand system. Does anyone have any idea what wire should connect to the Blue/White furnace wire? This wire does appear to be hot, so I capped it with a wire nut.
There are no Blue/White wires connected to the Command Module in he basement. The only wire I saw #16 (Furnace Run) appears to be red with a white stripe.
Photos or help making the proper connection is appreciated.
|
Linear Mode
