Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Jayco RV Owners Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 11-09-2021, 10:41 AM   #1
Junior Member
 
Join Date: Jan 2019
Location: Hartford
Posts: 24
Jayvoice

Has anybody been able to get this to work? I have this in my 2022, 382FLRB. I can get it to activate but it does not carry out any of the commands.

Thanks
Fritz is offline   Reply With Quote
Old 11-09-2021, 11:51 AM   #2
Senior Member
 
Stan&Sharon's Avatar
 
Join Date: Apr 2021
Location: New Hampshire
Posts: 524
I don't have this in my new Eagle but I'm interested because I'm spoiled with voice commands at home.

Are you saying 'Jayco' or do you need to say 'Hey Jayco' or 'Okay Jayco'?
I've found an article that shows only 'Jayco' is required but I think I've read otherwise.
Have you raised the volume so you can hear it's reply?
Is there a 'training mode' to teach it how your voice sounds?
__________________
2022 Eagle 321RSTS w/Overlander II solar
2021 GMC Denali 2500HD Gas w/Timbrens
PullRite SuperRails & #2700 SuperGlide Hitch
Stan&Sharon is offline   Reply With Quote
Old 11-09-2021, 12:01 PM   #3
Senior Member
 
Stan&Sharon's Avatar
 
Join Date: Apr 2021
Location: New Hampshire
Posts: 524
I installed google 'Assistant' in my new camper's wall tablet. I then raised the volume so I could hear it and now I can speak to my camper. Only when I raised the volume did I know it was listening. The wall tablet is a google tablet so gaining access to the controls is a swipe down, or use of the 'Settings' app.

I can ask it about the weather and set reminders and such. I can also turn lights on/off at my home... although there's little value since when we're camping we'd not need them on at our house. Unfortunately, turning lights on/off in the camper is only possible if I use ac outlet lamps.

Before anything like this works, you must connect your tablet to the internet and that requires using 'Settings' app. Does JayVoice use the JayCommand app? If so, you may need to visit the Google Playstore and update it... along with any other apps installed.
__________________
2022 Eagle 321RSTS w/Overlander II solar
2021 GMC Denali 2500HD Gas w/Timbrens
PullRite SuperRails & #2700 SuperGlide Hitch
Stan&Sharon is offline   Reply With Quote
Old 11-09-2021, 10:08 PM   #4
Junior Member
 
Join Date: Sep 2021
Location: Greenfield
Posts: 19
We have a 2022 North Point and it has the Jay Voice command in it. Ours works. You can say Hey Jayco or Jayco to get it to listen. Try saying “Hey Jayco” then pause 1 second and say “All Lights On”.

I have an informational sheet Jayco emailed me when i called them asking about it. We found we had it by accident. The dealer never told us anything about it. I will see if i can find the sheet and attach it tomorrow. It has some commands you can say on it.
jhogue46140 is offline   Reply With Quote
Old 11-10-2021, 05:07 AM   #5
Senior Member
 
jetlag's Avatar
 
Join Date: May 2021
Location: Vanceboro
Posts: 1,247
ALEXA!!!! turn on all the lights, lol
__________________
2021 Ram Laramie 3500 SRW Air ride 50Gal fuel tank.
2021 Jayco Pinnacle 36FBTS, Andersen Ultimate Hitch
jetlag is offline   Reply With Quote
Old 11-10-2021, 10:10 PM   #6
Junior Member
 
Join Date: Sep 2021
Location: Greenfield
Posts: 19
Here is the flyer Jayco sent me. Hope it helps.
Attached Files
File Type: pdf JayVoice Flyer.pdf (327.4 KB, 148 views)
jhogue46140 is offline   Reply With Quote
Old 11-11-2021, 09:15 PM   #7
Junior Member
 
Join Date: Jan 2019
Location: Hartford
Posts: 24
Quote:
Originally Posted by Stan&Sharon View Post
I don't have this in my new Eagle but I'm interested because I'm spoiled with voice commands at home.

Are you saying 'Jayco' or do you need to say 'Hey Jayco' or 'Okay Jayco'?
I've found an article that shows only 'Jayco' is required but I think I've read otherwise.
Have you raised the volume so you can hear it's reply?
Is there a 'training mode' to teach it how your voice sounds?
Just need to say ‘Jayco’
Fritz is offline   Reply With Quote
Old 11-11-2021, 09:21 PM   #8
Junior Member
 
Join Date: Jan 2019
Location: Hartford
Posts: 24
Quote:
Originally Posted by jhogue46140 View Post
We have a 2022 North Point and it has the Jay Voice command in it. Ours works. You can say Hey Jayco or Jayco to get it to listen. Try saying “Hey Jayco” then pause 1 second and say “All Lights On”.

I have an informational sheet Jayco emailed me when i called them asking about it. We found we had it by accident. The dealer never told us anything about it. I will see if i can find the sheet and attach it tomorrow. It has some commands you can say on it.
Thank you for the PDF.

I used the commands as you mentioned and from the PDF but it still doesn’t work. When I say ‘Jayco’, it beeps and the green light goes on. When I give it a command, it beeps again and a light circles around the JayVoice unit but nothing happens.

Very confusing. Seems so simple to use.
Fritz is offline   Reply With Quote
Old 11-12-2021, 06:14 AM   #9
Senior Member
 
Stan&Sharon's Avatar
 
Join Date: Apr 2021
Location: New Hampshire
Posts: 524
Quote:
Originally Posted by Fritz View Post
... a light circles around the JayVoice unit but nothing happens

So there's a 'JayVoice Unit'. Wow. Could you please upload a photo?
(attaching photos is an option using 'Advanced' in this forum - icon looks like a paperclip)
__________________
2022 Eagle 321RSTS w/Overlander II solar
2021 GMC Denali 2500HD Gas w/Timbrens
PullRite SuperRails & #2700 SuperGlide Hitch
Stan&Sharon is offline   Reply With Quote
Old 11-12-2021, 06:15 AM   #10
Senior Member
 
Stan&Sharon's Avatar
 
Join Date: Apr 2021
Location: New Hampshire
Posts: 524
Quote:
Originally Posted by Fritz View Post
... a light circles around the JayVoice unit but nothing happens

So there's a 'JayVoice Unit'. Wow. Could you please upload a photo?
(photo attach is option using 'Go Advanced' in this forum - icon looks like a paperclip)
__________________
2022 Eagle 321RSTS w/Overlander II solar
2021 GMC Denali 2500HD Gas w/Timbrens
PullRite SuperRails & #2700 SuperGlide Hitch
Stan&Sharon is offline   Reply With Quote
Old 11-12-2021, 10:51 PM   #11
Junior Member
 
Join Date: Sep 2021
Location: Greenfield
Posts: 19
Quote:
Originally Posted by Fritz View Post
Thank you for the PDF.

I used the commands as you mentioned and from the PDF but it still doesn’t work. When I say ‘Jayco’, it beeps and the green light goes on. When I give it a command, it beeps again and a light circles around the JayVoice unit but nothing happens.

Very confusing. Seems so simple to use.
Is the light circle blue or orange? Blue means it understood and processed the command. Orange means it didn't understand.
jhogue46140 is offline   Reply With Quote
Old 11-12-2021, 10:52 PM   #12
Junior Member
 
Join Date: Sep 2021
Location: Greenfield
Posts: 19
Quote:
Originally Posted by Stan&Sharon View Post
So there's a 'JayVoice Unit'. Wow. Could you please upload a photo?
(photo attach is option using 'Go Advanced' in this forum - icon looks like a paperclip)
I will try to snap a picture tomorrow and post.
jhogue46140 is offline   Reply With Quote
Old 11-13-2021, 11:23 AM   #13
Junior Member
 
Join Date: Jan 2019
Location: Hartford
Posts: 24
Quote:
Originally Posted by jhogue46140 View Post
Is the light circle blue or orange? Blue means it understood and processed the command. Orange means it didn't understand.
I think it was blue. I’m not home but will try again and let you know.

Do you have this as well? Does it work for you?
Fritz is offline   Reply With Quote
Old 11-13-2021, 07:16 PM   #14
Senior Member
 
nylyon's Avatar
 
Join Date: Apr 2011
Location: Southeast, NY
Posts: 1,107
I wonder if it will require a software update to enable? Mine is a 2020, but I did a title investigating and it seems possible to add this on to any BMPro equipped rv. It utilizes the RV-c data bus so adding it in should be almost plug and play.

Anyway, it is possible that the hardware is installed but an update to the controller and node needed to enable, because I haven’t seen anyone successfully activate this yet.
__________________
Karl - Southeast, NY
2020 377 RLBH
2018 Ram 3500 Mega Limited 6.7L Cummins w/ Aisin
nylyon is offline   Reply With Quote
Old 11-13-2021, 09:09 PM   #15
Junior Member
 
Join Date: Sep 2021
Location: Greenfield
Posts: 19
Here is a picture as promised.
Attached Thumbnails
C5BF84CB-A486-4356-9777-ED5CD592145C.jpg  
jhogue46140 is offline   Reply With Quote
Old 11-13-2021, 09:09 PM   #16
Junior Member
 
Join Date: Sep 2021
Location: Greenfield
Posts: 19
Quote:
Originally Posted by Fritz View Post
I think it was blue. I’m not home but will try again and let you know.

Do you have this as well? Does it work for you?
Yes we have it as well and it works.
jhogue46140 is offline   Reply With Quote
Old 11-29-2021, 02:54 PM   #17
Member
 
Join Date: Sep 2019
Location: Cambridge
Posts: 49
Quote:
Originally Posted by Fritz View Post
Has anybody been able to get this to work? I have this in my 2022, 382FLRB. I can get it to activate but it does not carry out any of the commands.

Thanks
We are having the same issue with our 2022 32RLTS we just picked up Friday. It hears the commands and lights up correctly showing it understands the command but doesn't actually do anything. So not sure if it isn't hooked up to the BMpro system or was never properly setup to work with the BMpro from the factory.
mavrick0 is offline   Reply With Quote
Old 11-29-2021, 04:51 PM   #18
Senior Member
 
Stan&Sharon's Avatar
 
Join Date: Apr 2021
Location: New Hampshire
Posts: 524
Does your wall tablet need it's wifi connected to the internet? Is there a bluetooth connection needed on it? Please post here what was needed to make it work.
__________________
2022 Eagle 321RSTS w/Overlander II solar
2021 GMC Denali 2500HD Gas w/Timbrens
PullRite SuperRails & #2700 SuperGlide Hitch
Stan&Sharon is offline   Reply With Quote
Old 12-01-2021, 12:25 PM   #19
Junior Member
 
Join Date: Jan 2019
Location: Hartford
Posts: 24
I got the coach connected to my home WiFi and still nothing. Hears the wake word, acknowledges the command but nothing happens.
Fritz is offline   Reply With Quote
Old 12-01-2021, 04:11 PM   #20
Senior Member
 
Stan&Sharon's Avatar
 
Join Date: Apr 2021
Location: New Hampshire
Posts: 524
Is there a button on the ceiling device? If not, does the lid come off to show a button within? I'm wondering if that button enables blue-tooth pairing and you might need to pair it with your wall panel and/or phone... no button, I'm outta ideas.
__________________
2022 Eagle 321RSTS w/Overlander II solar
2021 GMC Denali 2500HD Gas w/Timbrens
PullRite SuperRails & #2700 SuperGlide Hitch
Stan&Sharon is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Jayco, Inc. or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 03:43 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.