Large Slide Stuck

[Designer Ron]

Do you have to remove the belly pan on a 2009 designer to manually move slide room?

[Grumpy]

There may be a hole in the frame. Do you have a crank handle that came with the rig? If you need to access from below the panel should already be cut and taped.

[Designer Ron]

Yes a handle came with it

[JohnWedell]

That handle may be to lower the spare tire.

[Designer Ron]

Yes there is a handle for the spare tire But their is a second handle also, I just want to see if I can get it cranked in. Cant get mobile repair to come out here. We are way up in the north country in NY

[norty1]

Look for a small hole on the side near the middle of the slide. If not, look underneath for a square removeable piece of the material. removing it, you should see the slide motor / gearbox mechanism .

[Designer Ron]

Thanks norty1 there is a square panel underneath to remove. I amin the proceess of removing that Thank you