LED dimmers require a dedicated negative wire from the dimmer to only the lights to be dimmed. Do you have that condition?
Vicr, The existing on/off switch is a 2 wire connection. I have seen 2 wire dimmers and 3 wire dimmers (3rd wire for ground). I assume my LED lights are grounded to chassis ground.
__________________
2017 Eagle HT 27.5RKDS (Traded)
2020 Montana High Country 295RL
10th Anniversary Edition
2019 Silverado 3500HD - Duramax - SRW - 4WD - CC - LTZ - 8' Bed
Reese M5 20K
Vicr, The existing on/off switch is a 2 wire connection. I have seen 2 wire dimmers and 3 wire dimmers (3rd wire for ground). I assume my LED lights are grounded to chassis ground.
No, the LED lights cannot be grounded to the chassis, they must have a negative wire to the dimmer and then a dedicated negitive wire from the dimmer going only too the lights the dimmer will dim. I have a schematic at home I can post later when I get from work.
Linear Mode
