Jayco RV Owners Forum

Thread Tools Display Modes
Old 06-22-2015, 01:55 PM   #1
Senior Member
rthibodaux's Avatar
Join Date: May 2011
Location: Marrero,la
Posts: 143
Led lights

I want to install some LED lights under the awning with adhesive to the camper,
My question is, what is the best way to hook the lights electrical, I know you need a transformer and 110v. But does the electrical stay hook up to the strip. Is the transformer mounted to the camper and stays on and just pulu and unplug the 110volts,.

Randy T
2011 Jayco Eagle 321RLTS FW
2012 Dodge 3500
US Govt survey shows three out of four people make up 75% of the total population
rthibodaux is offline   Reply With Quote
Old 06-22-2015, 02:04 PM   #2
Senior Member
tnchuck100's Avatar
Join Date: Jun 2012
Location: Sparta, TN
Posts: 1,174
Most LED lights lend themselves to 12V power. Most use that transformer to convert the 110V AC to 12V DC. Why not just use the 12 V already available in the camper? That's the way I did it.

Chuck - Sparta, TN
2012 Jay Flight 22FB, 2 x Honda EU2000i
2013 GMC Yukon XL Denali AWD

EDUCATION is what you get when you read the fine print.....
EXPERIENCE is what you get when you don't.
tnchuck100 is offline   Reply With Quote
Old 06-22-2015, 02:26 PM   #3
Senior Member
mike837go's Avatar
Join Date: May 2015
Location: Campbell Hall
Posts: 2,837
Ditto on just running them on 12V. There are some nice dimmers out there.

Follow the awning's electrical feed to avoid putting fresh holes in the side of your camper.
TT 2015 19RD "TheJayco"
TV 2003 F-350 "Montblanc" - Housebroken chore truck

Sitting in The Cheap Seats.
And proud of it!
mike837go is offline   Reply With Quote
Old 06-22-2015, 03:56 PM   #4
Senior Member
Jagiven's Avatar
Join Date: May 2012
Location: Minnesota
Posts: 4,110
Lots of ways to get power to the strip of lights. Some people just mount the lights and then in camp use a quick connect and run a cord down to a cargo hold or another spot, just have to make the final connection at camp each trip. I have heard of one person running a wire up from the outside light to the LED strip light and used something called plug mold to cover the wires. Another option if you have an electric awning is to follow the electric awning motor wires back to the TT wall, and if possible pull another set of wires back through the hole and wire it up to a switch.
Jagiven is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 03:54 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.