Jayco RV Owners Forum
 


Reply
 
Thread Tools Display Modes
 
Old 10-14-2017, 04:56 PM   #1
Senior Member
 
shadester's Avatar
 
Join Date: Mar 2016
Location: Upstate N.Y.
Posts: 331
Lippert 3.0 error help

Having problems getting auto level to work. First I was getting Left rear error. Then I started to get RM error. Now it's back to Left rear error. Not sure what this means as it has always worked. I may have a manual after I get unpacked, has anyone had these error and what did you have to do to get it working?
__________________

__________________
______________________

2000 Coleman Bayside
2014 Ram Dually 6.7 Diesel
2016 North Point 375BHFS
shadester is offline   Reply With Quote
Old 10-14-2017, 07:46 PM   #2
Senior Member
 
Join Date: Jun 2011
Posts: 122
Quote:
Originally Posted by shadester View Post
Having problems getting auto level to work. First I was getting Left rear error. Then I started to get RM error. Now it's back to Left rear error. Not sure what this means as it has always worked. I may have a manual after I get unpacked, has anyone had these error and what did you have to do to get it working?
Had the same exact problems with mine. Heres how to clear it
1. Hook truck up to trailer
2. Extend front jacks at least 6" ( use manual mode)
3. Now extend rear jacks at least 6"
4. Now extend middle ones at least 6" Hold right and left buttons together to extend
5. Now go to retract all and hold button down until all 6 retract
It should now be reset and you are back to normal
__________________

bad99ram is offline   Reply With Quote
Old 10-14-2017, 07:59 PM   #3
Senior Member
 
shadester's Avatar
 
Join Date: Mar 2016
Location: Upstate N.Y.
Posts: 331
OK, that may do it. I was trying to figure out how to extend the middle jacks without automatic but wasn't sure, thanks!
__________________
______________________

2000 Coleman Bayside
2014 Ram Dually 6.7 Diesel
2016 North Point 375BHFS
shadester is offline   Reply With Quote
Old 10-14-2017, 09:31 PM   #4
Member
 
Join Date: May 2016
Location: Cincinnati
Posts: 78
We found that by putting 2 blocks each under the middle & rear jacks has worked. Yes, even on level ground. It is frustrating not understanding why the error message when everything looks great. Since adding the blocks we have not had the error messages.
__________________
Dennis & Donna Dohme
2016 36FBTS Pinnacle
2008 F450
USMC Veterans
Marine71-76 is offline   Reply With Quote
Old 10-15-2017, 09:35 AM   #5
Senior Member
 
Rock's Avatar
 
Join Date: Sep 2015
Location: Mexico Beach
Posts: 997
Had the same problem mine was left front jack error and said retract all jacks but left front would not come up. Retracted jack in Manuel mode and than dropped them all six seven inches. When you have an error code you can extend Middle jacks wish you could do that all the time. After retracted all was good. My unit is at factory and I asked them to go thru system. I am calling next week to see if they did. First year worked fine now 50/50 if it will
Rock
__________________
2016 Pinnacle 36 FBTS
2006 Dodge Ram 3500 4x4
SB SRW 5.9
Rock is offline   Reply With Quote
Old 10-15-2017, 11:55 AM   #6
Senior Member
 
Join Date: Jun 2011
Posts: 122
that is my understanding also. Only can drop middle jacks in manual mode when you have a error code.
bad99ram is offline   Reply With Quote
Old 10-15-2017, 12:20 PM   #7
Senior Member
 
Rock's Avatar
 
Join Date: Sep 2015
Location: Mexico Beach
Posts: 997
Yup or you have to introduce an error by unplugging a jack. I bet they did it like this so someone could not stupidly lower just center jack and bend or twist frame. Heck on just auto level when the center jacks ground you can see and hear the trailer flex and crackle
Rock
__________________
2016 Pinnacle 36 FBTS
2006 Dodge Ram 3500 4x4
SB SRW 5.9
Rock is offline   Reply With Quote
Old 10-19-2017, 08:13 PM   #8
Member
 
Join Date: May 2016
Location: athens
Posts: 30
I have tried to down load the lippert 3.0 manual but the file its too Bigfoot the forums messages
You can call lippert for the email or i can email to you
Tryintoretire is offline   Reply With Quote
Old 10-19-2017, 11:01 PM   #9
Senior Member
 
Join Date: Jun 2015
Location: smithville, ont.
Posts: 1,742
You can get the MyLCI app for your phone. It has all the manuals and trouble shooting for all LCI products.

Almost all Ground Control errors can be fixed by Zeroing the system again. The procedure is in the manual.
__________________
2016 North Point 341RLTS
520watts of solar. Morningstar MPPT
2017 F-350 Platinum CC SRW
klassic is offline   Reply With Quote
Old 10-20-2017, 08:42 PM   #10
Member
 
Join Date: May 2016
Location: athens
Posts: 30
Lippert

Great thanks
__________________

Tryintoretire is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 02:23 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.