Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Jayco RV Owners Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 05-05-2021, 05:53 PM   #1
Junior Member
 
Join Date: Oct 2020
Location: Lebanon
Posts: 10
lippert auto level 3.0

We have had issues with the auto leveling system and when we arrived where we are now the system faulted and gave me the message to manually retract all jacks to clear the error. well i can retract all but the left rear jack which will not budge. Help now what anyone else have this issue? also when i hit the retract arrow for the left rear the middle left jack retracts but the middle left button also controls the middle left jack eek
Speters22 is offline   Reply With Quote
Old 05-05-2021, 06:37 PM   #2
Senior Member
 
Radar57's Avatar
 
Join Date: Aug 2019
Location: Avon
Posts: 566
Has it been working correctly previously? Try rebooting the system, i.e. disconnect from shore power and disconnect the batteries for a few minutes and see if that resolves it.
__________________
Keith and Lisa Ward
2019 Pinnacle 36FBTS
2021 Ford F350 XLT CC LB DRW 6.7L Diesel
Demco 18K Autoslide Hitch and Timbrens
2019 Ford F350 SB 6.7L Diesel (Gone)
Radar57 is offline   Reply With Quote
Old 05-05-2021, 09:04 PM   #3
Member
 
HecBec's Avatar
 
Join Date: May 2020
Location: Lake Country
Posts: 52
We have a Talon 335T and our leveling system would work normal and then not. Finally figured out that the control panel was not tied into the corresponding jack location. At first the dealer said everything was fine, but they ended up finding the control panel was wired incorrectly to the jacks. The tech said it was a good chunk of a day to rewire. It was covered under warranty.
__________________

2019 RAM 2500HD 6.7 Cummins
2021 Jayco Talon 335T
HecBec is offline   Reply With Quote
Old 05-06-2021, 05:54 AM   #4
Junior Member
 
Join Date: Oct 2020
Location: Lebanon
Posts: 10
Will try thanks
Speters22 is offline   Reply With Quote
Old 05-06-2021, 08:02 AM   #5
Senior Member
 
Marine71-76's Avatar
 
Join Date: May 2016
Location: Cincinnati
Posts: 719
We have had this issue so many times. We found that we have to put blocks under all the jacks - except the front. We also had to recalibrate the system.

EDITED:

Here are the directions from Lippert https://lci-support-doc.s3.amazonaws...0001573-08.pdf.
__________________
Dennis & Donna Dohme
2016 36FBTS Pinnacle
2008 F450
USMC Veterans (both of us)
Marine71-76 is offline   Reply With Quote
Old 05-06-2021, 09:22 AM   #6
Junior Member
 
Join Date: Oct 2020
Location: Lebanon
Posts: 10
Thanks impressive Map!!
Speters22 is offline   Reply With Quote
Old 05-06-2021, 09:25 AM   #7
Junior Member
 
Join Date: Oct 2020
Location: Lebanon
Posts: 10
Was a bad fuse. We just had to find where they were. Haven’t tried it out yet but pretty sure this was the problem. ��
Speters22 is offline   Reply With Quote
Old 05-07-2021, 02:21 PM   #8
Senior Member
 
Rock's Avatar
 
Join Date: Sep 2015
Location: Mexico Beach
Posts: 2,181
I have attached some troubleshooting from an LCI guide I have. Hopefully a fuse issue like u said. I had weird problems last year and talked with LCI. They told me to check some stuff and finally decided I had a bad control panel.
I went to remove the panel (Pry it out with small screwdriver) and noticed one corner was not flush. Reseated it and all was fine. Got lucky
Attached Thumbnails
84661EBF-7760-4A6A-88AE-8507B28DF5C1.jpg   4019404C-6BFA-4AE6-8834-9AE9B9272063.jpg  
__________________
2024 Greyhawk 30Z
2023 Jeep Gladiator High Altitude Toad
2019 Ram 3500. Traded
2016 Pinnacle FBTS Traded
Rock is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Jayco, Inc. or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 08:58 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.