Is there a way to add more lights, etc to the Lippert OneControl? Right now it just does the awning, slides, leveling system and the awning lights. I thought it would control interior lights and monitor tank levels, etc but can’t figure out if it’s supposed too.
__________________
2018 Jayco Eagle HT 29.5BHOK
2016 Ford F-350 Super Duty SB CC PSD 4x4
You likely have the same 5port controller as, I have. Lippert has an 8 port unit but price and getting it hooked up to the appropriate wiring would be the issue. I have it on my list to be looked at in two weeks by my dealer. Doesn't make sense one of the two awning is on the controller to me
RoadrunnerII
__________________
RoadrunnerII
Livin the dream... Retired!
TV 2016 F250 Crew Sterling Gray SB 6.7 PS airlift ultimate Air bags
2017 Eagle 321RSTS
Pullrite autoslider
I'm glad I found this post. I just bought a new Jayco and was wondering the same thing. Seems a little silly to be able to control so few items with a system that has so much potential.
X3 same issue. I have the second awning on my 347bhok and throne control doesn’t operate it. Dealer clueless. I pulled the panel to the control and it seem as if it wasn’t wired in.
Well dealer tech was pretty good. I was correct it's a 5 port controller. So the second awning and light cannot be controlled. It's a cool feature to be able to control the levelling, 3 slides 1 awning and awning light. Wish Jayco had put the 8 port controller in when they factory added the second awning and light. That said I have seen a cedar creek with only the levelling on the system
RoadrunnerII
__________________
RoadrunnerII
Livin the dream... Retired!
TV 2016 F250 Crew Sterling Gray SB 6.7 PS airlift ultimate Air bags
2017 Eagle 321RSTS
Pullrite autoslider
Linear Mode
