Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Jayco RV Owners Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 11-07-2014, 11:37 AM   #1
Member
 
Join Date: Nov 2014
Location: Palmdale
Posts: 81
Lippert slideout motor issue

I just wanted to provide a tip that could avoid a major inconvenience. The two of the three slideouts on my 2015 36KTPS Pinnacle have Lippert in wall motors. The set screw that holds the motor from twisting came loose on one and the motor rotated and broke one of the wires. I was able to resolder the wire and reinstall the motor. It has been working fine after 5 camping trips and many cycles of the slide. I checked the set screws on the other 3 motors and found 2 of them very loose as well. The motors are a 100 to 1 ratio drive so the set screws need to be just snug enough to prevent twisting. You will need a ladder to reach the set screw on the outside of the rig. Don`t overtighten!
Jack 56 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Jayco, Inc. or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 07:17 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.