Lost my Leveler Feet!

[jetlag]

Originally Posted by Bobby Moore

Those wheels are sure shiny

Wonder who cleaned them? lol
You know the good folks here will have no idea what you are talking about.

[Bobby Moore]

C and C

[Pellmauid1]

Originally Posted by jetlag

Is it the screw that's on the other side of the hydraulic line connection you are all talking about? If so, I checked mine, I think I used a 4.5MM hex wrench. All very tight, however, one appears to be stripped, as the 4.5MM won't bite and the 5" and 4" are too big/small. I will add this to the file for when we take camper to dealer for warranty work in October.

The bolt that I'm taking about is underneath the foot pad, it's a 3/4" diameter with a 1/2" hex female end. I will post a picture. To tighten it you need to power up the jack or the cylinder will turn, also for checking them do the same. I checked the rest of mine and 2 were not tight.

[Pellmauid1]

Attached pictures of the bolt that holds on the EQ Systems foot pad. 3/4" diameter, 1/2" hex socket required, 1" long.

[Pellmauid1]

Jaco officially requires blue Loctite, but their tech guy told me he prefers red Loctite.

[jetlag]

Thank You very much, so I need to do this next time I hook up the camper so I can raise the legs. Those are mighty small screws to say the least