Jayco RV Owners Forum

Thread Tools Display Modes
Old 07-11-2016, 02:55 PM   #1
Junior Member
Join Date: Sep 2015
Location: Clarence Creek
Posts: 17
macerator pump

Bought a Flojet portable rv waste pump, want it to be a fully portable installation, want to connect it to my power pack if possible. Can I use a 12v male connector and plug it in the 12v of the power pack, if yes the only one I found so far was rated at 5amp, any bigger ones ? I don't think this is enough?


2016 Jayco 321 RSTS
2015 F250 Diesel
medicbob is offline   Reply With Quote
Old 07-11-2016, 03:19 PM   #2
Senior Member
TWP723's Avatar
Join Date: Mar 2015
Location: Abingdon
Posts: 3,507
You'll need at least a 20amp. and probably 10ga. wire.

2013 Jayco Eagle 328 RLTS
2013 Ford F350 6.7L 4x4 CCLB
W/Air Lift air bags (front & rear)
Equal-I-Zerô WDH
Me, Momma and Charles (RIP buddy)
And introducing Sofie!! ;)
TWP723 is offline   Reply With Quote
Old 07-12-2016, 06:54 AM   #3
Senior Member
Seann45's Avatar
Join Date: Jun 2010
Location: Saskatoon Sask Canada
Posts: 9,655
Just run wires (on alligator clips) from the battery to the pump make sure the wire is capable of handling 15 amps..
2004 Chev Silverado Duramax optioned past the max. 2009 Jayco Eagle 308 RLS 765 watts of solar, 6-6 volt batteries (696 amp hour), 2000 watt (4000 surge) whole house inverter.
132 days boondocking in 2017
215/2016, 211/2015, 196/14, 247/13, 193/12

Seann45 is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 03:12 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.