Main Panel Slide Buttons

[ECMChuck]

I'm hoping someone can help me out with my main panel slide buttons. It's strange but the buttons on the main board for the Electric slide out and the awning stopped working. The remote still works, luckily.

I looked at the fuse panel and one with an "auto reset" is allocated to the slides, but is also for the remote. So I would think that if the remote is working the fuse is ok.

I turned off power and turned off power to the battery and turned back on and they still don't work.

Any thoughts?

[Camper_bob]

Pull the panel and check the connections on the back of the switches. If they're good and tight, grab a meter and test the switches themselves.

Electrical connections made at factory are notoriously low quality, and switches do go bad from time to time.

[ECMChuck]

I'll do that. Seems strange that 2 would go at the same time. Thank you.

[Camper_bob]

Good point. Perhaps a relay? I've never worked on the newer duplex systems with remotes, so I don't know much about them... My stuff is all "old school" LOL!

[SCE]

ECMCHUCK - Wondering if you ever solved your issue with slide buttons. I have a 2020 Eagle 317RLok that is doing the same thing except that the awning controls aren't working also and only one slide button is working. I use my One Touch control touch panel and everything works fine so its not the fuse. My manual switches aren't working only slide 3 button seems to work. Was it the relay to the switches? thxs

[Tcheck]

The problem is not with the switch for the slides or awning it is with the smart or controller module. Just check the wires and fuses on the module. There is a access panel in the 1st cabinet behind the switches. I put some pictures hope it help some people