Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Jayco RV Owners Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 08-23-2021, 08:54 AM   #1
Junior Member
 
Join Date: May 2017
Location: Belgrade
Posts: 14
Main Switch panel question

Good Day!
This weekend my water pump switch feels like it disconnected behind the main panel. Luckily it was in the on position. Before I take out the 4 screws what am I getting myself into behind this panel, or is this something I should just take it in to an RV dealer?

Anyone ever have it where the switch disconnects?

Any insight would be great!
Thanks everyone and happy camping.
mnmstoy75 is offline   Reply With Quote
Old 08-23-2021, 10:23 AM   #2
Senior Member
 
Jagiven's Avatar
 
Join Date: May 2012
Location: Minnesota
Posts: 9,778
Nothing special about the switch. Pull out out, take a picture immediately.

12V wont hurt you, but if you are uncomfortable flip the main disconnect or disconnect the battery and shore power.

This link will take you to a picture of what the switch most likely looks like. It is held in place with a couple plastic clips. Then there are a few spade wire connectors. It is a fairly simple circuit.

https://www.amazon.com/RV-Designer-C...02&sr=8-9&th=1
__________________

2012 Jayco X23B
2020 Ram Laramie 3500 SRW Air ride 50Gal fuel tank.
2007 Dodge Dakota Quad Cab (sold)
Equal-I-zer 4-Point Sway Control
Jagiven is offline   Reply With Quote
Old 08-23-2021, 02:01 PM   #3
Junior Member
 
Join Date: May 2017
Location: Belgrade
Posts: 14
Smile Thank you!!

Thank you for the information - exactly what I was looking for and more. I really appreciate the time you took to reply!!
mnmstoy75 is offline   Reply With Quote
Old 08-23-2021, 04:19 PM   #4
Site Team
 
norty1's Avatar
 
Join Date: Jan 2011
Location: James Island, SC
Posts: 22,857
Many damage the switch by pushing it to hard. I may just snap back in once you can access the back. Take a picture of the number on the switch if it needs replacing.
__________________
Moderator
2011- 351RLTS Eagle, MorRyde suspension/pin box,
2017- F350 6.7 PSD Lariat FX4,SRW, SB,CC
Hughes PWD SP-50A, TST TPMS
Gator roll-up bed cover
B&W Turnover ball, Companion Std hitch
Can't find what you're looking on JOF? Try Jayco Owners Forum Custom Google Search
norty1 is offline   Reply With Quote
Old 08-23-2021, 06:28 PM   #5
Senior Member
 
Topperace's Avatar
 
Join Date: Feb 2020
Location: On The Move
Posts: 1,202
I've taken our panel off several times, reordered the slides so it made since as to which switch # was what slide, etc, mostly 12v behind the panel, thus wasn't too worried...cleaned up some of the wiring too...haven't had an issue with anything yet...after a year.
__________________
S&T
2019 Entegra Insignia 37MB
2022 JEEP Wrangler 4xe (chase and touring vehicle)
(2019 NP 383FKWS)
(2019 RAM 3500 DRW Big Horn)
Topperace is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Jayco, Inc. or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 11:17 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.