|
|
02-08-2019, 07:12 AM
|
#3141
|
Senior Member
Join Date: Jan 2016
Location: Magnolia
Posts: 4,841
|
Quote:
Originally Posted by Dskyward
Hey Tom, there is an interesting fix to logic boards in computers, monitors, washers and dryers on the Internet. Remove it and put it on a piece of paper on cookie sheet, put it in a preheated 450 degree oven for 10 minutes, then let cool. Reinstall. I fixed a flickering 30” Samsung monitor screen(graphic processor board), it still works fine to this day...and also our 8 year old residential Frigidaire dryers logic board, but that fix lasted just 7 months for some reason. New board was $165, found a used dryer for $50.
It’s all about the inferior lead free solder used in these boards that eventually the heat gets to it and causes microscopic cracks and fissures and the electrical resistance goes up and loses critical voltage to where it can’t process instructions. So people do this trick to reflow the solder in various electronics. Even old smartphones. Do some research to what temps and times others have used and you’ll get an idea. The post oven smell will go away in no time if the DW is concerned.
|
I’ll look into it. Thanks
__________________
2016 North Point 377 RLBH, with a few mods, disc brakes, shocks, Sailun g rated tires, wet bolts
2014 Ford F350 Platinum sold
2017 Ford F350 Lariat, CC, 6.7PSD, DRW, Trailer Saver BD3 hitch
|
|
|
02-08-2019, 03:46 PM
|
#3142
|
Senior Member
Join Date: May 2016
Location: Way down here........FL
Posts: 2,098
|
Quote:
Originally Posted by Magnolia Tom
Got my replacement flooring for the bedroom installed today. Got some vinyl planks from Floor and decor. Wife wanted a little lighter color so she chose the Tuscan Griege.
Still need to clean up and find something to trim out the edges. The quarter round is a bit bulky and I couldn’t get it around the curved wall despite making a bunch of kerf cuts and wetting down the backside.
Attachment 47015Attachment 47016
Attachment 47017
|
Tom there is going to be a lot of people that are NEVER going to see the trim around the curve.............
But of course we will all know. LOL
__________________
Jack
2016 Pinnacle 36 KPTS
2016 F350 Lariat CC LB dually 6.7
|
|
|
02-08-2019, 04:02 PM
|
#3143
|
Senior Member
Join Date: Jan 2015
Location: DFW
Posts: 3,493
|
Tom...try some of this... https://www.amazon.com/Flex-Trim-fle...9663236&sr=8-2
My buddy used it on some pillars he had in his house that were round. Worked great for him. He painted it to match his wood floors. It came out amazing!
__________________
Dan
'24 GMC 2500 AT4X AEV Edition
|
|
|
02-08-2019, 04:28 PM
|
#3144
|
Senior Member
Join Date: Jan 2016
Location: Magnolia
Posts: 4,841
|
Quote:
Originally Posted by jasum
Tom there is going to be a lot of people that are NEVER going to see the trim around the curve.............
But of course we will all know. LOL
|
Lol Jack. My DW will know too!
__________________
2016 North Point 377 RLBH, with a few mods, disc brakes, shocks, Sailun g rated tires, wet bolts
2014 Ford F350 Platinum sold
2017 Ford F350 Lariat, CC, 6.7PSD, DRW, Trailer Saver BD3 hitch
|
|
|
02-08-2019, 04:30 PM
|
#3145
|
Senior Member
Join Date: Jan 2016
Location: Magnolia
Posts: 4,841
|
Quote:
Originally Posted by Bookemdanno
|
Thanks Dan. Yes I’m very familiar with flex trim (I build homes) and I considered getting some but I’ll probably end up doing something that looks more factory
__________________
2016 North Point 377 RLBH, with a few mods, disc brakes, shocks, Sailun g rated tires, wet bolts
2014 Ford F350 Platinum sold
2017 Ford F350 Lariat, CC, 6.7PSD, DRW, Trailer Saver BD3 hitch
|
|
|
02-08-2019, 06:17 PM
|
#3146
|
Senior Member
Join Date: May 2016
Location: Way down here........FL
Posts: 2,098
|
Quote:
Originally Posted by Bookemdanno
|
Dan there is a recall on your truck............don't remember for what
Sorry
__________________
Jack
2016 Pinnacle 36 KPTS
2016 F350 Lariat CC LB dually 6.7
|
|
|
02-08-2019, 06:19 PM
|
#3147
|
Senior Member
Join Date: Jan 2015
Location: DFW
Posts: 3,493
|
Quote:
Originally Posted by jasum
Dan there is a recall on your truck............don't remember for what
Sorry
|
I saw it...something to do with the steering...but who needs that? Steering is overrated!
__________________
Dan
'24 GMC 2500 AT4X AEV Edition
|
|
|
02-08-2019, 06:21 PM
|
#3148
|
Senior Member
Join Date: May 2016
Location: Way down here........FL
Posts: 2,098
|
Quote:
Originally Posted by bookemdanno
i saw it...something to do with the steering...but who needs that? Steering is overrated!
|
lol
__________________
Jack
2016 Pinnacle 36 KPTS
2016 F350 Lariat CC LB dually 6.7
|
|
|
02-08-2019, 06:22 PM
|
#3149
|
Senior Member
Join Date: May 2016
Location: Way down here........FL
Posts: 2,098
|
Quote:
Originally Posted by Bookemdanno
I saw it...something to do with the steering...but who needs that? Steering is overrated!
|
Hey thought you were on vacation?? WTF
__________________
Jack
2016 Pinnacle 36 KPTS
2016 F350 Lariat CC LB dually 6.7
|
|
|
02-08-2019, 06:23 PM
|
#3150
|
Senior Member
Join Date: Jan 2015
Location: DFW
Posts: 3,493
|
I got back on Sunday & have been playing catch up at work all week!
I needed this week to flush out my liver from last week! [emoji23]
__________________
Dan
'24 GMC 2500 AT4X AEV Edition
|
|
|
02-08-2019, 06:26 PM
|
#3151
|
Senior Member
Join Date: Jan 2016
Location: Magnolia
Posts: 4,841
|
Quote:
Originally Posted by Bookemdanno
I got back on Sunday & have been playing catch up at work all week!
I needed this week to flush out my liver from last week! [emoji23]
|
Ah yes, the vacation hangover! Lol
Those are the worst (or best depending on your point of view)
__________________
2016 North Point 377 RLBH, with a few mods, disc brakes, shocks, Sailun g rated tires, wet bolts
2014 Ford F350 Platinum sold
2017 Ford F350 Lariat, CC, 6.7PSD, DRW, Trailer Saver BD3 hitch
|
|
|
02-08-2019, 06:27 PM
|
#3152
|
Senior Member
Join Date: May 2016
Location: Way down here........FL
Posts: 2,098
|
Quote:
Originally Posted by Bookemdanno
I got back on Sunday & have been playing catch up at work all week!
I needed this week to flush out my liver from last week! [emoji23]
|
That's pretty bad man............ LOL
__________________
Jack
2016 Pinnacle 36 KPTS
2016 F350 Lariat CC LB dually 6.7
|
|
|
02-08-2019, 06:35 PM
|
#3153
|
Senior Member
Join Date: Jan 2015
Location: DFW
Posts: 3,493
|
It was a practice run for when the DW takes me to Paris next month...I’ll let y’all know how it goes & take pics of the beaches of Normandy! Yes, I know y’all are cussing me right now [emoji41]
I got to bump one of her employees because she knows I’m a huge WWII junkie!
__________________
Dan
'24 GMC 2500 AT4X AEV Edition
|
|
|
02-08-2019, 06:53 PM
|
#3154
|
Senior Member
Join Date: May 2016
Location: Way down here........FL
Posts: 2,098
|
Quote:
Originally Posted by Bookemdanno
It was a practice run for when the DW takes me to Paris next month...I’ll let y’all know how it goes & take pics of the beaches of Normandy! Yes, I know y’all are cussing me right now [emoji41]
I got to bump one of her employees because she knows I’m a huge WWII junkie!
|
Are you allowed to bring any friends??
Tom and I would like to go too..........
__________________
Jack
2016 Pinnacle 36 KPTS
2016 F350 Lariat CC LB dually 6.7
|
|
|
02-09-2019, 04:35 AM
|
#3155
|
Senior Member
Join Date: Jan 2013
Location: Twin Falls
Posts: 930
|
Quote:
Originally Posted by Magnolia Tom
Got my replacement flooring for the bedroom installed today. Got some vinyl planks from Floor and decor. Wife wanted a little lighter color so she chose the Tuscan Griege.
|
I just bought some of the vinyl plank for my trailer, I was curious if you used glue or if you left it floating, I will be installing mine in a few weeks, any tips are welcome.
__________________
2011 Dodge Ram 2500 Cummins
2012 Starcraft Autumn Ridge 297 BHS
|
|
|
02-09-2019, 08:09 AM
|
#3156
|
Senior Member
Join Date: Jan 2016
Location: Magnolia
Posts: 4,841
|
Quote:
Originally Posted by Flyrotor
I just bought some of the vinyl plank for my trailer, I was curious if you used glue or if you left it floating, I will be installing mine in a few weeks, any tips are welcome.
|
I installed a floating floor. Did not use glue.
If you buy the snap lock style of flooring, be aware that you will have to work around furniture that isn’t easily moved to get flooring to snap into place. So, careful planning of which direction to lay the floor and which side of the room to start is important. There are some tricks to overcome some of these challenges but if you haven’t laid a lot of flooring before, it will really frustrate you.
If you are using the peel and stick type flooring, the install is much easier to slide a piece under the dresser or the bed. Also easier to cut.
__________________
2016 North Point 377 RLBH, with a few mods, disc brakes, shocks, Sailun g rated tires, wet bolts
2014 Ford F350 Platinum sold
2017 Ford F350 Lariat, CC, 6.7PSD, DRW, Trailer Saver BD3 hitch
|
|
|
02-10-2019, 02:06 PM
|
#3157
|
Senior Member
Join Date: Jan 2016
Location: Magnolia
Posts: 4,841
|
__________________
2016 North Point 377 RLBH, with a few mods, disc brakes, shocks, Sailun g rated tires, wet bolts
2014 Ford F350 Platinum sold
2017 Ford F350 Lariat, CC, 6.7PSD, DRW, Trailer Saver BD3 hitch
|
|
|
02-10-2019, 04:19 PM
|
#3158
|
Senior Member
Join Date: Apr 2018
Location: Natalbany Creek Campground, Amite City, LA
Posts: 3,244
|
Looks first class Tom! The molding came out great!
__________________
AL & JANET KRUEBBE
2019 PINNACLE 37RLWS
2018 NORTH POINT 315RLTS (TRADED)
2017 RAM 3500 DRW DIESEL/AISIN 4.10 AIR BAGS
B&W COMPANION TURN OVER BALL HITCH
Formerly from Sequim, WA
|
|
|
02-10-2019, 04:20 PM
|
#3159
|
Senior Member
Join Date: Jan 2015
Location: DFW
Posts: 3,493
|
Quote:
Originally Posted by AKRUEBBE
Looks first class Tom!
|
+1...as always Tom.
__________________
Dan
'24 GMC 2500 AT4X AEV Edition
|
|
|
02-10-2019, 04:28 PM
|
#3160
|
Senior Member
Join Date: Jan 2016
Location: Magnolia
Posts: 4,841
|
Quote:
Originally Posted by Bookemdanno
+1...as always Tom.
|
Thanks Dan!
Quote:
Originally Posted by AKRUEBBE
Looks first class Tom! The molding came out great!
|
Thanks Al!
__________________
2016 North Point 377 RLBH, with a few mods, disc brakes, shocks, Sailun g rated tires, wet bolts
2014 Ford F350 Platinum sold
2017 Ford F350 Lariat, CC, 6.7PSD, DRW, Trailer Saver BD3 hitch
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|