 |
|
05-02-2017, 04:52 PM
|
#921
|
|
Senior Member
Join Date: Jan 2016
Location: Magnolia
Posts: 4,841
|
Quote:
Originally Posted by DirtHopper
Tom I have the same setup as u for my hose storage I removed from my old trailer. Gonna install in the same place as u did.
Did u made brackets up & screw to the frame? I have stainless brackets from old trailer that just aren't fitting the way I like.
|
I used some metal straps (actually used hurricane straps) bent to fit and screwed with self tapping screws into the frame
Sent from my iPhone using Tapatalk
__________________
2016 North Point 377 RLBH, with a few mods, disc brakes, shocks, Sailun g rated tires, wet bolts
2014 Ford F350 Platinum sold
2017 Ford F350 Lariat, CC, 6.7PSD, DRW, Trailer Saver BD3 hitch
|
|
|
|
05-02-2017, 07:09 PM
|
#922
|
|
Member
Join Date: Dec 2016
Location: Pittstown, NJ
Posts: 79
|
Quote:
Originally Posted by Magnolia Tom
I used some metal straps (actually used hurricane straps) bent to fit and screwed with self tapping screws into the frame
Sent from my iPhone using Tapatalk
|
Thanks Tom.
I had to cut my plastic posts down, my Open Range was wider than the 377.
I'll probably finish installing tomorrow.
__________________
Wayne & Sandy, Bella-Cockapoo, Toby-Lhasa Apso
2017 North Point 377 RLBH
2016 GMC 3500 Max Denali SRW
Curt 25K with a roller for short bed
Curt front hitch for bicycles
|
|
|
|
|
05-03-2017, 11:42 AM
|
#923
|
|
Senior Member
Join Date: Aug 2016
Location: Eastern NC
Posts: 182
|
Quote:
Originally Posted by Magnolia Tom
Replaced faucets today
Old faucet
New faucet
Old kitchen faucet
 |
Bathroom faucet took almost 10 mins.. Kitchen faucet a little different. We bought a Delta that had the 3/8 compression fittings on it which are not compatible with the original fittings.
Tom - do you recall what you purchased to make the kitchen faucet work?
Sent from my iPhone using Tapatalk
__________________
2017 North Point 387
2017 F-350 DRW
|
|
|
|
|
05-03-2017, 11:52 AM
|
#924
|
|
Senior Member
Join Date: Jan 2016
Location: Magnolia
Posts: 4,841
|
Quote:
Originally Posted by jsk
Bathroom faucet took almost 10 mins.. Kitchen faucet a little different. We bought a Delta that had the 3/8 compression fittings on it which are not compatible with the original fittings.
Tom - do you recall what you purchased to make the kitchen faucet work?
Sent from my iPhone using Tapatalk
|
If yours is like mine, your water lines under the sink have the female screw on fitting on the ends of the water lines. You have 2 choices:
Cut off the ends and install shut off valves in their place. Use can get shark bites so you don't need a crimp tool for the pex line. Then install water lines from faucet to shut offs.
Get a brass adapter with one end fitting in the factory water line connections and the other end that fits the faucet water lines.
I did the brass adapter route because I had the fittings already laying around the garage.
Sent from my iPhone using Tapatalk
__________________
2016 North Point 377 RLBH, with a few mods, disc brakes, shocks, Sailun g rated tires, wet bolts
2014 Ford F350 Platinum sold
2017 Ford F350 Lariat, CC, 6.7PSD, DRW, Trailer Saver BD3 hitch
|
|
|
|
|
05-03-2017, 02:06 PM
|
#925
|
|
Senior Member
Join Date: Aug 2016
Location: Eastern NC
Posts: 182
|
Quote:
Originally Posted by Magnolia Tom
If yours is like mine, your water lines under the sink have the female screw on fitting on the ends of the water lines. You have 2 choices:
Cut off the ends and install shut off valves in their place. Use can get shark bites so you don't need a crimp tool for the pex line. Then install water lines from faucet to shut offs.
Get a brass adapter with one end fitting in the factory water line connections and the other end that fits the faucet water lines.
I did the brass adapter route because I had the fittings already laying around the garage.
Sent from my iPhone using Tapatalk
|
Yes mine are the female ends but will need a reducer to get down to the size of the new faucet end. I will debate about how to proceed as I would like to have valves.
Thanks
Sent from my iPhone using Tapatalk
__________________
2017 North Point 387
2017 F-350 DRW
|
|
|
|
|
05-04-2017, 04:42 PM
|
#926
|
|
Senior Member
Join Date: Jan 2015
Location: DFW
Posts: 3,493
|
Tom - You get yours back from the dealership yet? I got the call today that they were pulling it into the shop today to start on mine...nothing like waiting until the last minute. I told them that I have to have it back by next Thursday, as the oldest daughter's birthday party is next weekend. They guaranteed me it would be done.
__________________
Dan
'24 GMC 2500 AT4X AEV Edition
|
|
|
|
|
05-04-2017, 05:14 PM
|
#927
|
|
Senior Member
Join Date: Jan 2016
Location: Magnolia
Posts: 4,841
|
Negative Dan
Still at the dealer waiting to get looked at/worked on. Promised to be ready by the 16th as we have a trip scheduled the weekend after Mother's Day.
Sent from my iPhone using Tapatalk
__________________
2016 North Point 377 RLBH, with a few mods, disc brakes, shocks, Sailun g rated tires, wet bolts
2014 Ford F350 Platinum sold
2017 Ford F350 Lariat, CC, 6.7PSD, DRW, Trailer Saver BD3 hitch
|
|
|
|
|
05-04-2017, 05:32 PM
|
#928
|
|
Senior Member
Join Date: Jan 2015
Location: DFW
Posts: 3,493
|
I don't know about you, but I think I'm going thru withdrawals!
__________________
Dan
'24 GMC 2500 AT4X AEV Edition
|
|
|
|
|
05-04-2017, 07:13 PM
|
#929
|
|
Senior Member
Join Date: Jan 2016
Location: Magnolia
Posts: 4,841
|
That's the way I feel too. Weird coming home without the trailer in the driveway
Sent from my iPhone using Tapatalk
__________________
2016 North Point 377 RLBH, with a few mods, disc brakes, shocks, Sailun g rated tires, wet bolts
2014 Ford F350 Platinum sold
2017 Ford F350 Lariat, CC, 6.7PSD, DRW, Trailer Saver BD3 hitch
|
|
|
|
|
05-04-2017, 08:43 PM
|
#930
|
|
Senior Member
Join Date: Jun 2015
Location: smithville, ont.
Posts: 2,684
|
For 5 months I came home to a driveway with no trailer.
__________________
2016 North Point 341RLTS
520watts of solar. Morningstar MPPT
4 6volt 235ah Surrette batteries
2017 F-350 Platinum CC SRW
|
|
|
|
|
05-05-2017, 06:32 AM
|
#931
|
|
Senior Member
Join Date: Jan 2016
Location: Magnolia
Posts: 4,841
|
Quote:
Originally Posted by klassic
For 5 months I came home to a driveway with no trailer.
|
I would not survive being without my trailer for that long. We camp year round in Texas so that would totally make me go loco
Sent from my iPhone using Tapatalk
__________________
2016 North Point 377 RLBH, with a few mods, disc brakes, shocks, Sailun g rated tires, wet bolts
2014 Ford F350 Platinum sold
2017 Ford F350 Lariat, CC, 6.7PSD, DRW, Trailer Saver BD3 hitch
|
|
|
|
|
05-05-2017, 04:36 PM
|
#932
|
|
Senior Member
Join Date: Sep 2015
Location: North Greenbush, NY
Posts: 752
|
You guys aren't giving me "warm and fuzzy's"!!!!! My 377 will have been gone for 4 weeks, as of tomorrow, and I already miss it!!!
__________________
Be Safe, and Everyone Goes Home,
Rick
2014 RAM Laramie 2500 w/6.7L Cummins Diesel and Automated Safety Hitch
2016 377RLBH Jayco North Point
300W of Suntech Solar w/Rogue MPPT Controller & Xantrex 2000W PSW Inverter
|
|
|
|
|
05-06-2017, 09:00 AM
|
#933
|
|
Senior Member
Join Date: Sep 2015
Location: Mexico Beach
Posts: 2,196
|
X2 on that. Four months of the first six in shop. Used for two than back in for three. Now I get to do two factory trips in Oct.
Ahhhhhhh
Rock
|
|
|
|
|
05-06-2017, 09:49 AM
|
#934
|
|
Senior Member
Join Date: May 2016
Location: Way down here........FL
Posts: 2,098
|
Still think we should go to Big John D in Louisiana.
I know he can get to us sooner than any of the dealers and it will be done RIGHT.
Sent from my iPhone using Tapatalk
__________________
Jack
2016 Pinnacle 36 KPTS 
2016 F350 Lariat CC LB dually 6.7
|
|
|
|
|
05-06-2017, 12:20 PM
|
#935
|
|
Senior Member
Join Date: Apr 2017
Location: Metro
Posts: 161
|
My old trailer has been at the dealer/factory for 7 months, was supposed to be done Monday now will be at least another week. Soon as it gets back I'm trading it in for my new Jayco
Sent from my SM-G955U using Tapatalk
|
|
|
|
|
05-07-2017, 07:49 AM
|
#936
|
|
Member
Join Date: Dec 2016
Location: Pittstown, NJ
Posts: 79
|
Quote:
Originally Posted by Magnolia Tom
I used some metal straps (actually used hurricane straps) bent to fit and screwed with self tapping screws into the frame
Sent from my iPhone using Tapatalk
|
I modified my old brackets & hung both holders from old trailer, had bunk house model so I had extra hoses. Both worked out well in the area that u used. The left one looks a little crooked but it just the end cap. Thanks for ur info .
__________________
Wayne & Sandy, Bella-Cockapoo, Toby-Lhasa Apso
2017 North Point 377 RLBH
2016 GMC 3500 Max Denali SRW
Curt 25K with a roller for short bed
Curt front hitch for bicycles
|
|
|
|
|
05-07-2017, 07:52 AM
|
#937
|
|
Member
Join Date: Dec 2016
Location: Pittstown, NJ
Posts: 79
|
First mod was a small one. Moving the batteries sideways and reposition the straps.
__________________
Wayne & Sandy, Bella-Cockapoo, Toby-Lhasa Apso
2017 North Point 377 RLBH
2016 GMC 3500 Max Denali SRW
Curt 25K with a roller for short bed
Curt front hitch for bicycles
|
|
|
|
|
05-07-2017, 12:06 PM
|
#938
|
|
Senior Member
Join Date: Jan 2016
Location: Magnolia
Posts: 4,841
|
Quote:
Originally Posted by DirtHopper
I modified my old brackets & hung both holders from old trailer, had bunk house model so I had extra hoses. Both worked out well in the area that u used. The left one looks a little crooked but it just the end cap. Thanks for ur info .
|
Looks good!
Sent from my iPhone using Tapatalk
__________________
2016 North Point 377 RLBH, with a few mods, disc brakes, shocks, Sailun g rated tires, wet bolts
2014 Ford F350 Platinum sold
2017 Ford F350 Lariat, CC, 6.7PSD, DRW, Trailer Saver BD3 hitch
|
|
|
|
|
05-07-2017, 03:59 PM
|
#939
|
|
Member
Join Date: Dec 2016
Location: Pittstown, NJ
Posts: 79
|
Just finished the TV in the loft.
__________________
Wayne & Sandy, Bella-Cockapoo, Toby-Lhasa Apso
2017 North Point 377 RLBH
2016 GMC 3500 Max Denali SRW
Curt 25K with a roller for short bed
Curt front hitch for bicycles
|
|
|
|
|
05-10-2017, 07:02 PM
|
#940
|
|
Senior Member
Join Date: Mar 2017
Location: Hampton
Posts: 224
|
I got my heavy duty shackles and wet bolts along with the X-Factor cross member installed today. Thanks for all the info, tips, and advice from you guys. The install went smooth and only took about 4 hours. Here is a picture of the nylon bushings which defiantly show plenty of wear with only 2700 miles logged on it....
When I pulled the wheels off I had grease from the bearings on them. So now I am thinking I should take it in for the brakes. Is this the what you guys have been seeing that makes you all concerned about the brakes and seals?
Thanks
__________________
Outta Here!
2012 RAM 3500 4x4 Laramie DRW - High Output 6.7L Cummins, Max Tow, FireStone Airbags, 60 Gallon Titan XXL fuel tank, Fully Deleted
2017 Jayco North Point 377rlbh with Kaut NV 2.0 bike rack
|
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linear Mode
