MOR RYDE king pin with Andersen hitch

[Kkingsfield]

Is the MOR RYDE king pin compatible with the Andersen 5th wheel hitch with gooseneck attachment? I have a short bed Ram 3500 and like the Andersen system but can't confirm that it's compatible with my setup. Thanks

[Jace817]

Mine was

[Big1]

Yeah, I have seen a few setup that have the SB with the Anderson hitch.

[Packerbacker_TX]

Originally Posted by Kkingsfield

Is the MOR RYDE king pin compatible with the Andersen 5th wheel hitch with gooseneck attachment? I have a short bed Ram 3500 and like the Andersen system but can't confirm that it's compatible with my setup. Thanks

Our 2018 5'r came with the Mor Ryde kingpin from the factory and we use the Anderson Ultimate Hitch 3 (Aluminum) and red cup adapter on our rig. I absolutely LOVE that thing!! It's 40# and easy to setup/remove. Takes about 10 min if I'm lollygaggin. However, I do have a LB truck.

That said, the Anderson hitch is made for SB trucks. I just like the extra space for more stuff in the back while I'm towing. You can always measure the distance between the turnover ball in the bed and the back glass. The Anderson cup adapter allows you to hang it closer or farther which will give you about 6" space to work with. I believe it's really only crucial when you're making the hard corners (80-90' turns). Good Luck

example: Rear cab| --> turnover ball |--> Anderson hitch| --> Anderson Receiver ball. Gives an additional 12" of distance from cab.