Moryde Popping and jerking

[Dsykes]

I have a 2016 Pinnacle with a Moryde pin box. I have about 3500 miles on the trailer and recently the pin box has developed a lot of movement with popping and jerking. Can anyone help me with this issue?

[Magnolia Tom]

A call to MorRyde for their advice would be my suggestion. I bet they have a “rebuild “ kit that includes new pads or bushings.

[frenchfrydaddy]

Same issue with my MORryde also. 3000 miles on mine , Contacted MORryde, sent pictures, they said it looked fine. They said there's no adjustment. It is not the same as when it was new, way more movement. 2018 293rkds

[JaycoAl]

After you do all that, get you a couple of wrenches and make sure ALL the nuts are tight. Mine were NOT tight.

[Springhook]

Originally Posted by JaycoAl

After you do all that, get you a couple of wrenches and make sure ALL the nuts are tight. Mine were NOT tight.

Thank you. Mine were not tight either.

[TxLoser]

I just did a little google-fu and found that the retaining rod bolts should be torqued to 95 lbs. I’ll be keeping an eye on mine.

[Mopar_Earl]

The rubber is a wear item and can be replaced. Not sure on the 4 slide bushings. I have no trouble with the one on my 2017 Eagle 293RKDS so far. I believe I recall seeing TSB's on the Moryde site on the pin box.


Earl